1AZTS00096-2001-05 Chrysler PT Cruiser Combination Switch

Replaces

2001-05 Chrysler PT Cruiser Combination Switch DIY Solutions

1AZTS00096
FREE SAME DAY SHIPPING
Save 36%
List: $96.95 Save: $35.00
Part 1AZTS00096
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BSS00892

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a single purchase of a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Returns: Parts with electrical components cannot be returned once installed.

  1. step : Disconnect the battery (0:59)
    • Unclip the air box cover and lift it up
    • Use a 10 mm socket and ratchet to disconnect the negative battery terminal
  2. step : Remove the wiper switch lever (1:29)
    • Use a Phillips screwdriver to remove the screws securing the steering column cover
    • Remove the two screws at the top of the switch assembly and move the switch assembly off to the side.
    • Disconnect the wiring connections to the switches.
    • Remove the T10 Torx screws to separate the two switch levers.
  3. step : Replace the switch lever(s) (4:10)
    • Use your T10 Torx driver to secure the levers together.
    • Reconnect all the wiring leads.
    • Mount the switches to the steering column with the two Phillips screws.
    • Clip in the locking tabs in the wiring harness plugs.
    • Replace the steering column cover pieces.
    • Secure the steering column panels with a few Phillips screws.
    • Reconnect the negative battery terminal
    • Replace the air box cover.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Star Drivers & Sockets

  • T10 Torx Driver


Fits the following Makes:

Year Make Model Description
2001-2005Chrysler PT Cruiser Chrysler PT Cruiser with Fog Lights Combination Switch

Part Interchange

Brand Label Part Number
DIY Solutions BSS00892

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BSS00892
Product Reviews
4.88/ 5.0 8
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
1
0
0
0
2002 PT Cruiser light switch
January 23, 2017
Very easy to install. Works great. Didn't take long at all. Hardest thing was disconnecting the battery. Thanks guys.
Great Service
March 10, 2017
I bought the turn signal and fog light switch lever on Thursday had it in my Post Office Box on Monday by 9 a.m. Called my handyman told him I had the part picked him up and returned to my house. It took him a whole 20 minutes from start to finish. The part was the exact same part that was bad; the service was great. If I need any more parts for my PT Cruiser I will order from 1A Auto. Thank you for such great service.
Fit Perfect - Easy install
March 21, 2017
Arrived quickly, easy install . it took about 15 minutes to install and works perfectly. I can't say how long it will last, because I just installed it. We took the car in for inspection, and we had the fuse pulled because of the issue with the fog lights turning on when the car was off and draining the battery. New PA inspection Law states if fog lights are installed they must work as designed or be removed or repaired. they wanted $80.00 just to remove the lights! This did the job.
Pretty Easy
July 5, 2017
Everything went quite well. The U-tube (or whatever it's called) was very handy. The only thing was need slightly different tools than specified (No problem at all) Would like to have seen the 'boot' included. Turns out the mechanic that changed it before didn't install any boot. Overall things went quite well and it's workin' like a champ!
Perfect fit
August 10, 2017
This part is a exact replica of the original part. Installation was a breeze. If your fog lights are activating on their own I recommend this replacement to repair the condition.
PT Cruiser Turn Signal and fog light switch
November 28, 2017
Easy to install and fits perfectly. Looks exactly like factory part. Built well and operates smoothly.
Quick and accurate
March 8, 2019
Easy to order and arrived quickly. Item was packed well and looked identical to my OEM. Installed exactly like the original and all functions worked correctly. Thanks for the excellent service.
Easy replacement of PT cruiser turn signal controls
March 9, 2019
The PT cruiser turn signal control has a common problem with the fog light turning on by it self and draining your battery dead. I Purchased this replacement combination switch. There is a easy to follow video on the 1A Auto YouTube channel that shows step-by-step how to remove the old one and replace the new one. It took about 20 minutes start to finish to do it, and when it was over, everything worked perfectly on the switch. I am very happy that my battery will keep its charge, now that I have a new switch that won’t drain the battery like my old defective one did
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
will the high beam and the fog light work on this combination switch ?
August 10, 2019
10
Yes, it did on my niece’s 2004 PT Cruiser
August 10, 2019
10
worked just fine for me, good product
August 10, 2019
10
yes. both will work. to turn on lights you turn knob and to use fog lights you have to pull end out like you are extending arm. when you turn your lights off, it turns off both beams and fogs. make sure you transfer flasher relay and wiper controls from old switch!
August 10, 2019
10
Yes, according to the information you provided, this part will be able to work with the functions. Please let us know if you have any other questions!
August 11, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2001-05 Chrysler PT Cruiser Combination Switch DIY Solutions-1AZTS00096 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.