This replacement grille is just what you need to get your Ford Escape in good looking form again!

Specifications:

  • Bumper cover mounted
  • Replaces dealer part number: YL8Z17B968BA, YL8Z 17B968 BA
  • Black with chrome trim
  • High quality item that is built to strict quality control standards
  • Direct bolt on
  • has provision for emblem

Makes a great replacement and has substantial cost savings over a dealer grill.

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Bumper Cover (0:50)
    • Remove the two 10mm bolts from the top of the bumper cover
    • Remove the three Phillips head clips from each inner fender
    • Remove the two Phillips clips underneath the grille
    • Pull back each inner fender
    • Remove the Phillips clip behind each inner fender
    • Remove the 10mm bolts underneath the bumper cover
    • If you have fog lights, disconnect the fog light wiring harnesses
    • Pull down the bumper cover
  2. step : Removing the Grille (4:45)
    • Remove the two 10mm nuts from the grille
    • Unclip the grille from the bumper cover
  3. step : Installing the Grille (5:24)
    • Remove the two 10mm nuts that hold the emblem to the old grille
    • Pull the emblem off the old grille
    • Push the emblem onto the new grille
    • Fasten the 10mm nuts onto the emblem
    • Push the grille onto the bumper cover using the locating tabs
    • Push in the grille tabs
    • Fasten the two 10mm nuts onto the grille
  4. step : Installing the Bumper Cover (6:33)
    • Lift the bumper cover into place
    • If you have fog lights, connect the fog light wiring harnesses
    • Install the two 10mm bolts into the top of the bumper cover
    • Push the watershield into place underneath the bumper
    • Install one 10mm bolt into the bottom of the bumper cover
    • Insert the Phillips head clip behind each inner fender
    • Insert the Phillips clips underneath the grille
    • Install the remaining 10mm bolts into the bottom of the bumper cover
    • Push the inner fenders into place
    • Insert the three Phillips clips into each inner fender
    • Tighten the two 10mm bolts into the top of the bumper cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:01 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • Partslink FO1200390
  • Hollander 104-01690B
  • OE # YL8Z17B968BA

Vehicle Fit

  • 2001-2004 Ford Escape Limited Chrome & Black Grille
  • 2001-2004 Ford Escape XLT Chrome & Black Grille
Part #: 1ABGR00287

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More