Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1aauto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you headlight removal and installation on this '04 Ford Ranger, pretty much the same for any '93 to present Ranger and no tools are necessary. Headlights on these Ford Rangers are really quite nicely designed and pretty easy. There are two tabs that you pull up on right back here. Once you have those tabs up, just pull your light forward. Now, here's the bulb. You can access the bulb easily. Pull this protector off and then your turn signal bulb, you twist, and it comes out, and your light is out. Obviously, you can service the bulbs.
The headlight bulb, you twist this, pull it out, and then you can pull the bulb out. Here's our original light, and here's the new light from 1A Auto. Now, obviously if your original light has been broken or something, you're going to want to replace it with a new one. You can also see, this truck doesn't have many miles on it, so the lens isn't too cloudy or faded, but if you drive your truck a lot of miles or in sandy conditions, these lenses can get pretty chipped up and clouded. A nice easy way to fix that is to just put a new set of lights in. You can see our lights are going to mount in the same. They have all the same connectors and everything so everything is going to go in just like the original.
One tip is before you put the new light in, just try and match it up with the distance. You can see that this adjuster is pretty close to the light there, so just preliminarily aim it. Take your new light and just try and get that just about the same distance. For now, obviously this light is fine, so we're going to put it back in the truck. Installing is just the reverse of the procedure. Put your signal in first, turn and lock, plug your light bulb in, and then carefully place it back in there.
I'm kind of looking down to make sure that all the adjusters are going into their holes properly. The lower one here is just a little bit off. There we go. Down there, just make sure that is all the way through. Then on this side, make sure that one there and the one down below, which is hard to see. Make sure those are all the way in. Push it really good. Push down on your tabs. You can see that mine's not in very well. Put it back up here. Push down and mount it nice and secure.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video we will replace the parking light on this 2004 Ford Ranger, the same as any '01 to '07 Ranger. You start out by, to get to the park lights, you remove the head lights. There are 2 tabs that you pull up on right back here. Once you have those tabs up, just pull your light forward. Here's the bulb. You can access the bulb easily. Pull this connector off. Then, your turn signal bulb, you twist, and it comes out, and your light is out.
Once you have your headlight out, remove those two 6 mm bolts. It has a little pin that holds it in right there. You can twist and remove that.
Here's our original light. Here's our new light from 1A Auto. You can see they're exactly the same. If you're looking to freshen your lights up, to freshen your truck up, it will do well, all of those scratches. Obviously, if you get in a little skirmish, with a rock, or a little bit of a fender bender, it takes out your marker light, this is a perfect replacement. All the mounting points are the same, and it's going to go in there exactly the same.
Obviously, to put it back on is the reversal of the procedure. Put your light in. Twist. Set it in. Put in the 6mm bolts.
Installing is the reverse of the procedure. Put your signal in first, turn and lock. Plug your light bulb in. Then carefully place it back in there. I'm kind of looking down to make sure all the adjusters are going to their holes properly. This middle one, here, is a little bit off. There we go. So, down there, just make sure that is all the way through. On this side, make sure that one there, and the one down below, which is hard to see. Just make sure those are all the way in. Push in real good. Push down on your tabs. You can see this one's not in very well. Pull back up. Push down. Now, it's in nice and secure.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2001 Ford Ranger. We're going to show you how to remove and replace the OEM fog lights in your lower bumper valance.
If you like this video, please click subscribe. We have a ton more information on this truck, as well as many other makes and models. If you need this part for your vehicle, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: 8mm socket, ratchet, socket extension
On the backside of the fog light, inside of the lower bumper valance, disconnect the electrical connector for the light. Remove the three 8mm screws around the housing. For this, we'll use an 8mm socket and ratchet. Be sure to keep one hand on the back of the fog light when removing the last bolt, then remove the fog light from the valance.
Here we have our old fog light that we removed from our vehicle, and our new part from 1AAuto.com. As you can see, these parts are identical, with the same bracket, we have the same light. This one's nice and fresh, while this one has a lot of debris and moisture damage on the inside of the lens.
The same mounting location is on the backside. This new one actually comes with a nice breather tube here to allow moisture out of the housing and prevent it from building up. We have an adjustment screw on the bottom so you can align them if necessary. It even comes with a nice, new bulb in there too, so if your fog lights have moisture build up or become cracked, broken, or just aren't producing the light output they should, this new part from 1A Auto is going to go in direct fit just like your original equipment.
Install your new fog light assembly into the valance. Start your three 8mm screws by hand. Once you've got the screws started, tighten them down with an 8mm socket and ratchet. Reinstall the electrical connector, and repeat these steps on the opposite side.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
