2000-06 Toyota Tundra Front & Rear Complete Strut Assembly & Shock Absorber Kit 4 Piece Set TRQ SCA57104 - 1ASSP00845

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Rear Shocks (0:36)
    • Remove the 14mm nut from the top of the shock
    • Counterhold the lower 17mm nut with a 17mm wrench and remove the nut with a 17mm socket and ratchet
  2. step : Installing the Rear Shocks (2:44)
    • Compress the shock three times
    • Remove the top nut, washer, and one bushing
    • Insert the shock into place
    • Place the bushing, washer, and top nut on
    • Tighten the top 14mm nut
    • Torque the top 14mm nut to 15 foot-pounds
    • Jack up from underneath the rear differential to align the shock into place
    • Tighten the lower 17mm nut with a 17mm wrench and a 17mm socket and ratchet
    • Torque the lower nut to 64 foot-pounds

Tools needed for replacement:

    General Tools

  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket

4.40/ 5.0
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Thumbs up!
Shocks and struts appear to be good quality. Everything fit as it should.Thanks!
April 9, 2018
Out of stock
I was really looking forward to buying these parts but its out of stock but great deal.
September 30, 2018
1Aauto way to go!! ??
It pas a perfect fit, no problems. An easy install!!
October 18, 2018
Shocks from 1AAuto are the best
I bought some shocks for my 2004 tundra and they got delivered less than a week , good costumer service and fast shipping. Shocks from work good and have your ride back to working conditions. Thanks
December 27, 2018
Quality parts
The products I behave bought from y’all are really good . I would recommend y’all to anyone without dought cause yalls products work well for me every time .
July 5, 2019
2004 tundra suspension
Great shocks, easy to install. Ride well, quick shipping and fair priced. Thank u
July 9, 2019
Super best
Wouldn’t have bought if not for the video instructions!!! Have the tools and with the extra knowledge you offered and my attitude, if she can do it I can too. I got the job done and saved 450.00 at my age 67 what more can I ask for. Thank you
August 15, 2019
Love the ride when I’m off road and on highway
August 23, 2019
Did the job no more cranking noise from the old shocks
October 27, 2019
04 tundra struts
Parts were of acceptable quality. Priced reasonably. Fit was awful. Ill never buy from A1 again. Waste of time & money.
November 30, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What brand are the shocks?
Dustin C April 12, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please dont hesitate to ask.
Brian F April 13, 2016
Will these work on a TRD ?
NICOLLE S September 29, 2019
I have no idea. I installed them on a 2005 Tundra Double cab LTD. Had no issues with the installation. Make sure you have a 16mm open-end and box wrench of at least 10 inches the space between top of the shocks and the bed are tight.
R I September 29, 2019
Thank you for contacting us. These are listed to fit 2000-2006 Toyota Tundra 4 Wheel Drive models.
Christa R September 30, 2019
I installed on 2003 Tundra 4WD TRD. They fit fine and seem to be working good.
Cameron S September 30, 2019
Not sure, put them on a 02 SR5
T A October 6, 2019
Will it fit up to my 2 wd? Also, how much of a lift above stock?
Joey L November 5, 2019
Thanks for your inquiry. This kit will only fit the 2000-2006 Toyota Tundra 4 Wheel Drive. Also, our kits are not listed to fit vehicles with modified suspension. Please let us know if we can be of any further assistance and we will be happy to help.
Peter L November 5, 2019
Year Make Model Description
2000-2006Toyota Tundra Toyota Tundra 4 Wheel Drive Front & Rear Complete Strut Assembly & Shock Absorber Kit 4 Piece Set
Part 1ASSP00845
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: SCA57104