1ASFK04384-2000-05 Hyundai Accent Steering & Suspension Kit 8 Piece Set

Replaces

2000-05 Hyundai Accent Steering & Suspension Kit 8 Piece Set TRQ

1ASFK04384

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • Moog EV436
  • Moog K80616
  • Moog K80617
  • Moog K90691
  • Moog ES3377
  • OE # 56820-22000
  • OE # 5654025000
  • OE # 5682022000
  • OE # 5483017010
  • OE # 5483017020
  • TRQ PSA59657
FREE SAME DAY SHIPPING
Save 33%
List: $81.95 Save: $27.00
Part 1ASFK04384
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA59657

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 8 Piece Kit
    • Fits LH (Driver Side) &  RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

    After completing this repair, it's recommended to have your car aligned

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nuts with the vehicle on the ground
    • Remove the hubcap
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:12)
    • Measure from the end of the tie rod boot to the end of the tie rod
    • Spray the 22mm nut on the outer tie rod with penetrating oil
    • Hold the inner tire rod with a 13mm wrench
    • Loosen the nut on the outer tie rod with a 22mm wrench
    • Remove the cotter pin from the ball joint nut with pliers
    • Remove the 17mm nut from the ball joint
    • Hit the spindle with a hammer to knock the ball joint free
    • Spin the outer tie rod free
  3. step : Installing the New Outer Tie Rod (3:00)
    • Screw the grease fitting on the bottom of the new tie rod
    • Tighten it with a 7mm socket
    • Twist the outer tie rod into the inner tie rod
    • Measure from the outside of the boot to the inside of the tie rod to match your previous measurement
    • Hold the outer tie rod with a wrench while tightening the 22mm nut to the tie rod
    • Attach a grease gun to the ball joint fitting and give it several pumps
  4. step : Reattaching the Wheel (4:42)
    • Slide the wheel into place
    • Replace the hub cap
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 22mm Socket
  • 7mm Socket
  • 17mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 13mm Wrench
  • 22mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2000-2005Hyundai Accent Hyundai Accent Steering & Suspension Kit 8 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS03313
DIY Solutions SUS07031
DIY Solutions SUS07030
DIY Solutions SUS00375
DIY Solutions SUS07385
DIY Solutions SUS07976
MOOG K80617
MOOG K80616
MOOG ES3377
MOOG EV436
MOOG K90691
MOOG Chassis Products EV436
MOOG Chassis Products K90691
MOOG Chassis Products K80616
MOOG Chassis Products ES3377
MOOG Chassis Products K80617

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA59657
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2000-05 Hyundai Accent Steering & Suspension Kit 8 Piece Set TRQ-1ASFK04384 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.