This replacement Mercury Sable tail light is just what you need to get your Mercury in good looking form again!

This tail light features:

  • Right Hand (Passenger side)
  • Replaces dealer Part Number: YF4Z 13404 BA
  • Mounts on 1/4 panel
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

This Mercury Sable tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight (0:18)
    • Remove the thumb screw.
    • Pull the trim panel up and push the insulation forward.
    • Remove the four 11mm nuts on the back of the taillight.
    • Disconnect the harness.
    • Push the plug out.
    • Pull the taillight out and off.
  2. step : Changing a Bulb (1:51)
    • Twist the socket out counterclockwise.
    • Pull the bulb out.
    • Push a new bulb in.
    • Twist the socket clockwise to lock.
  3. step : Replacing the Taillight (2:17)
    • Twist out the sockets and remove the harness from the old taillight.
    • Twist the sockets into the new taillight.
    • Push the harness and plug into place.
    • Line up the taillight and push it into place.
    • Connect the harness.
    • Replace the four 11mm nuts.
    • Put the insulation and trim panel back into place.
    • Replace the thumb screw.

Tools needed for replacement:

    Wrenches - Metric

  • 11mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2003 Mercury Sable Sedan Tail Light Passenger Side

This part replaces:

  • Partslink FO2801174
  • Hollander 166-01862R
  • OE # YF4Z 13404 BA
  • TYC 11-5887-01
  • DEPO 331-1967R-US
Only 2 left in stock
Part #: 1ALTL00535

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:21 min)