Specifications

  • Left Hand (Driver Side)
  • Includes lens, housing, and mounting panel
  • Includes integrated parking/marker lamp
  • Bulbs not included
Fit guaranteed
  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

    Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : Remove the front bumper cover (1:20)
    • Remove the push clips
    • There are four on the top of the fascia
    • There should be about 8 under the fascia
    • Unbolt the two 10 mm bolts, on each side of the bumper cover.
    • Pull off the bumper cover and set aside
  2. step : Remove the headlight assembly (3:30)
    • Remove the three nuts fastening the headlight assembly
    • Unplug the harness and bulbs
    • Remove the headlight and set aside.
  3. step : Install the new headlight assembly (6:07)
    • Plug in the bulbs and harness
    • Bolt in the headlight assembly using your socket and ratchet and extensions.
    • Reinstall the bumper cover by clipping in all the push-clips and bolt in the two 10 mm bolts.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2001 Nissan Altima Headlight Driver Side

This part replaces:

  • OE # 260600Z825
  • Partslink NI2502126
  • Hollander 114-58623L
  • DEPO 315-1138L-AS
Part #: 1ALHL00656


How-to Video:

(09:38 min)