Kit Includes: (2) Front Sway Bar Links (2) Front Lower Control Arms with Ball Joints (2) Front Outer Tie Rods (1) Idler Arm (1) Pitman Arm (2) Front Inner Tie Rods (2) Front Upper Control Arms with Ball Joints (1) Idler Arm Bracket Assembly
Specification
Steering / Suspension Option
with 3 Groove Pitman Arm
Location
Front
TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Application Specific Design: No modifications necessary
Anti-Corrosion Coated: Enhanced surface life
Pre-greased: No additional maintenance required
Kitted for Restored Performance: Improved road-feel and handling
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How To Replace Sway Bar Links 2001-14 GMC Sierra
Created on:
Tools used
Adjustable Wrench
14mm Socket
Jack Stands
Ratchet
Floor Jack
1. Diagnosis
The stabilizer link can break and the bushings can wear out.
A good way to tell if the problem is the stabilizer link is if there is a rattling that stops when you go around turns.
2. Remove the stabilizer link
Apply penetrating oil to the link.
Use a 14mm socket and ratchet to unbolt the stabilizer link.
Secure the upper part of the stabilizer link with an adjustable wrench to help get the traction needed to work the nut loose.
3. Install the new stabilizer link
Thread the new link into place
Put all your bushings and washers in place.
Make sure everything is snugged into their places in the stabilizer bar and the control arm
Use a jack to push the nut on to get it started.
Repeat the removal and installation process up to this point on the other side before tightening the stabilizer link nut up all the way.
If the old link is stuck or broken, you can use a Sawzall to cut it out.
Take great care to make sure you don’t damage any other parts if you do.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to replace the sway bar links in this 2002 GMC 2500HD, basically the same as most '88 to '06 GM pickups, SUVs, vans; also the same as a couple of Ford applications. Tools you'll need are a jack and jack stands for some vehicles, 14 mm socket and ratchet or whatever is correct for your link, they could be different depending on application, an adjustable wrench, and some penetrating oil.
Your stabilizer link is right up underneath. This big bar here is your stabilizer bar, and then here is your control arm. It's connected by this, which is the stabilizer link right here. This can break. Also, these bushings, these rubber bushings can wear out, which will cause a rattling sometimes when you go over bumps. You have a good idea if it's the stabilizer link if, when you go around a turn, the rattling stops. I'm going to show you how to replace that.
On top, you're going to want to spray some penetrating fluid. This is a 14 mm bolt down here at the bottom. What you're going to want to do is put an adjustable wrench onto this side. This is an original link here, so the thing on top is kind of bolt-shaped. I've got that on there to hold it. Now I'm going to attempt to slowly unscrew it.
The bolt comes down, and that can come out. Then you can see, even though there's nothing too terribly wrong, you can see that this one is worn, right in here, so we'll replace it. On the original you can see this top nut has edges to it so you can get that wrench on there to hold it in place. We've gotten it out of there, but we still have this in place. Just pull that right out, like that. I'm going to take my new link and I'm going to put it up through. This bushing has the ridge up into the control arm. Then I'm going to take a bushing down and then a washer on top of that, then my spacer. Then I'm going to take a bushing and a washer, and now the step goes up into the sway bar. Then just push that.
In order to get this in, what I've done is this is a little jack. If you're doing this just on the ground, you can do the same thing. Put the jack in underneath the stabilizer bar here, lift it up, and create plenty of room to push that up through. Then you want to make sure these bushings all go right into the holes in the stabilizer bar, right there, and the control arm. This last bushing goes with the ridge down, then the washer on top. I'm going to put the jack right in underneath here, push this up in to get the nut on.
I've got this together and I've got the nut started on there. I'm going to replace the other side first before I tighten it up. I wouldn't take apart the other side here you can see, this is the one from the driver's side and this is the one from this side, so you can see this whole part was rough and it broke off. It's possible this link wasn't really doing anything anyways. This here that broke off of this one is stuck inside there. What I'm going to have to do is I'm going to have to actually cut this link with my Sawzall. I'm going to do that very carefully, because I don't want to contact the boot or anything else. I don't want to contact the CVs. I just want to cut through the link itself.
Now with the car on the ground, you want to tighten up the links. I'm just using an air ratchet. You can hand tools, obviously. Tighten up both sides and you're done. We hope this helps you out. Brought to you by www.1AAuto.com- your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
PSA65894
In Stock
Product Reviews
Loading reviews
4.39/ 5.049
49 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
33
9
3
1
3
05 chevy 2500hd
D
December 1, 2019
All parts fit while
GMC 3500 front end rebuild
S
December 9, 2019
User friendly website, very good quality and parts prompt delivery. would recommend to all
Quality of parts
Victor
December 24, 2019
Parts fit just like they supposed to fit and delivered on time. The customer support is great.
All parts fit perfectly
L
December 27, 2019
I ordered all the control arm kit for my 2500 Silverado and it came with all 13 parts that fit perfectly. Customer service was friendly and helpful.
Best truck parts
K
January 6, 2020
I ordered parts for my 2005 Chevy received them in less than two days all parts were as is described in the description everything was there fast an orderly delivery great parts highly recommend will be back for more.
Just put in
Matthew
March 2, 2020
Everything went in with ease, now to see how durable they are
FRONT END REBUILD
D
March 3, 2020
VERY GOOD VALUE FOR COST, EVERYTHING WORKED PERFECT
Cheep parts
N
March 20, 2020
Cheaply made parts but you get what you pay for everything fit fine the lower A arms where different with no crossmember but still fit up I just hope they dont bend or brake without the crossmember to strengthen them. Nothing realy wrong with the parts just not impressed dont know how lo g they will last.
SHAWN
March 21, 2020
CHEVY DURAMAX INSTALLATION WENT WELL,ONLY THING FOUND WAS MY UPPER CONTROL ARMS ARE GUSSETED ON BOTTOM AND NEW ONE WERE NOT. BUT DO HAVE A 3500 AND NOT A 2500. COMPARED THE FACTORY 2500 AND DID NOT HAVE THE GUSSETS, FACTORY
Thank you
C
March 28, 2020
I got my parts very fast and everything fit great thank you!
Definitely recommend
C
July 2, 2020
I would definitely recommend ordering from 1A auto best quality parts quick delivery service and awesome customer service I will definitely be ordering more parts from here and from here only thanks 1A Auto
Great Quality nice and Meaty
Maria
September 16, 2020
Happy I went with 1aauto.com . Better parts for my truck love how heavy the parts are heavy duty. Also recommend timberns from them my truck feels absolutely Sweet Thanks Guys.Great Customer Service as well!!! Professionals
Affordable and fast delivery.
Tim
October 5, 2020
This is a good all in one kit. The price is fair and the parts shipped very quickly even in this pandemic. My one concern is with the control arms. The uppers are not fully boxed like stock and the lowers are missing the center support. On a 1/2ton truck im sure they are fine but on a 3/4ton like my 02 2500HD i might have gone with something different.
Nice parts for the price
Benjamin
November 22, 2020
The upper and lower control arms were a little different than stock for a 3500, but the design would probably be at least as strong. The lower arm was very similar from a name brand. The front end is now tight and drives like a new one.
100% satisfied
Thomas
December 6, 2020
Couldnt be happier. Parts showed up in just a couple days. Everything fit right in place and seemed built a little stouter than factory.
Quality parts shipped fast to your door
C
December 6, 2020
Parts were quality and shipping was fast and cheap.
Great fit
J
January 20, 2021
Replaced 15 front end suspension parts on Silverado Classic 3500. Only problem, (1) nut was shipped incorrectly. Right size wrong thread! I am very happy with the combo parts I purchased and additional shock absorbers. Highly recommend A1Auto for aftermarket parts and how to videos.
Steering and suspension
danny
February 18, 2021
Good quality parts that helped the handling of my truck. Much smoother ride and drives straight as an arrow.
Jon
February 21, 2021
Everything fit perfectly. shipping was fast will order more from A1
Great product with easy to follow videos
Z
February 24, 2021
I will recommend this product to anyone who wants to rebuild a front end. I watched 2 of the many videos to see how to do one thing since I knew how to do the rest. The videos were very in depth and very easy to follow. Great product!
03 silverado 2500 4x4 Duramax
K
February 25, 2021
Fitment and quality is good, It took me two weekends to install. My truck drives like new after the alignment was done.
Everything is right on the money
Allen
March 5, 2021
Excellent fit all the way around, great company to work with. Parts got to my door right away and everything looks good
Thank you guys for everything love the parts everything on my front end work perfect could not be more pleased everything fit thank you
Timothy
April 1, 2021
Just wanted to say that I have received my parts on time and was very pleased with them I installed everything they all went together no problems everything fit everything works great I would recommend you guys to anyone who asks and I would come back to you for further needs I am very satisfied My truck drives great with the new parts I want to thank you guys very much for helping me outWrite your review here. It must be at least 20 characters long. Consider whether you would recommend this product and what you like or dislike about it.
Aight den
J
April 4, 2021
Everything bolted up fine no modifications needed. Seems built as good as factory
Excellent
Robert
April 15, 2021
all parts fit perfectly and were exactly same quality as oem. Will definitely be ordering more parts in the future.
Dirk
June 11, 2021
Product on time and as described will use them again
Decent.
Brian
June 14, 2021
Parts came as expected. Lowers a frames nice and solid. Upper a frames no where near as rigid or sturdy as the original. Original has solid metal plate welded underneath. The new ones are hollow. I hope they hold up.
Why?
Cody
June 16, 2021
Good quality but the control arms have different sized ball joints then the OEM parts so that will be a big pain in the rear-end in the future.
Great product
Robert
June 18, 2021
Everything went on great did a 5k miles vacation after installation was real smooth
Mark
February 8, 2022
Exactly what I needed, fast shipping too. Thanks.
Karl
March 8, 2022
Awesome parts thank you for the service your guys were on time with everything
Mitch
March 9, 2022
Quality parts, fit perfect, fast shipping great customer service
Edward
April 27, 2022
Parts were good quality. Fit well great parts for the price
Robert
April 30, 2022
Extremely satisfied with prodct
Run away from this brand!
C
July 21, 2022
This suspension kit is absolute garbage. I purchased this kit and rebuilt my front suspension in early 2020 and the inner tie rods and upper ball joints have already failed, to the point my alignment guy wouldn't adjust the alignment for fear he would make it worse. The outside edge tread blocks are gone on both of my tires which were new after the rebuild and alignment (and my front right is clicking when I brake, I suspect the CV from this kit is starting to fail as well). Spend the money on Moog and run away from this TRQ stuff, you will save yourself a lot of trouble!
Great Buy
Jim
November 9, 2022
Worth the money, nice to have all components in one kit. Parts are sturdy, used on my 2001 2500HD 4x4.
David
November 17, 2022
Easy installation and good quality parts. The QR codes on the packages were helpful even though not all of them worked. I would definitely recommend these parts to my friends and family.
great product.
Larry
December 1, 2022
Bolts right in and works great.
Pitman arm fitment
Jacob
May 14, 2023
Not quite as beefy as the setup I took off but seems to be decent quality. Just a heads up on the pitman arm being a 3 spline and not 4. Just in case anyone else was wondering. It didn't have a description in the listing and I bought a new gear box for a total steering rebuild and the gear box is a 4 spline and the pitman arm sent with this kit is a 3
Caesar dents and Autobody.
Cesar
May 24, 2023
Working good so far. We just installed a week ago.
Great Kit
Andrew
June 2, 2023
Excellent kit, replaced my 250K mile front end and it drives like a new truck now.
Price sounds too good to be true because it is.
James
June 30, 2023
Parts are trash. Steering components had to be replaced with OEM. Lower control arm ball joint had 1 thread protruding through the nut when torqued to Specs in 1A Auto videos. Just a horrible experience. But I felt in my gut that the price was too good to be true. Now we know why. $5k lesson I hope others don't have to learn.
Horrible
JOE
July 30, 2023
IT's maybe 3 months since front end was rebuilt with these parts and most of them need replacing already. How is this possible !!!
Robert
August 15, 2023
Everything worked out well.
Dale
September 25, 2023
Very Helpful when I needed it.
Great product
Justin
February 23, 2024
Everything fits as it should but you need to contact them for replacement ball joints because other oe ball joints don't fit. So don't waste your time ordering other ones bc the oe ball joints have a fatter head so they can't be pressed in.
Good for price. Check for uniformity of parts.
Kaleb
April 4, 2024
Fine for the price. Lower control arms came pressed with two different ball joints. One has a grease fitting, the other is pre greased and sealed. Both ball joints have different thread lengths and nut sizes. One barely left enough clearance to torque and didn't have a castle nut that the rest of kit utilized. I used thread locker and torqued to spec, should be fine, but time will tell. Otherwise kit is a good fit.
Great Purchse
Kelly
April 6, 2024
Product arrived with all pieces, on time. It was easy to find what I needed on the site, and working with customer service was also easy. It saved me so much money going this route.
Excellent product
Kirby
June 4, 2024
Excellent product! The quality you get for the price is unbeatable!
Customer Q&A
Is this kit for Coil Spring or Torsion Bar pickups?August 26, 2019
Nathan C
10
This kit is not specific to fitting one or the other. The suspension type will not make a difference for the fitment of these parts. Thank you for the inquiry!
August 27, 2019
Andra M
This beats moog standards?August 30, 2019
Frank R
10
Thank you for your inquiry. 1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. Please let us know if you have any other questions.
August 30, 2019
A C
What brand are these parts?August 30, 2019
Shane H
10
Thank you for your inquiry. These parts come from our 1A Auto in-house brand. We have all of our parts manufactured to exact OE specifications, so as long as they are listed to fit your vehicle they will fit and function just like the original parts. Please contact us if you have any further questions.
August 30, 2019
A C
Will this fit 4 wheel drive?December 1, 2019
Victor R
10
Thank you for the inquiry. If your vehicle is listed in the compatible vehicle chart, this will be correct for your model. It is not specific for 4wd or 2wd.
December 3, 2019
Christa R
What spline is the pitman arm 32-33?January 10, 2020
K Y
10
Not sure, but it fit my 2006 silverado 3500.
January 10, 2020
J M
10
Hey Kyle,
We do apologize but we do not have the information about the pitman arm.
January 10, 2020
Corey M
Will it fit 4x4 2500 hd?January 14, 2020
Skip S
10
Thank you for your inquiry. Could you please verify the year of your vehicle? We will be happy to verify if it is listed to fit or not.
January 14, 2020
Peter L
are these with grease fittings?January 23, 2020
Richard H
10
Thank you for your inquiry, Richard. These parts will not come with grease fittings. Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.
January 24, 2020
T I
Do the ball joints come pressed in already?January 29, 2020
Sam M
10
They do.
January 29, 2020
J A
10
Yea they do and as far as the whole kit so far so good . Im pleasantly surprised!
January 29, 2020
D L
10
Yes they do.
January 29, 2020
R A
10
These ball joints will come already pressed in. Please do not hesitate to contact us with any further questions.
January 29, 2020
Emma F
10
They do! Very easy to install. 1A Auto also has great videos if you need any guidance!
February 3, 2020
Nicholas S
Do I need to add tie rod sleeves to the tie rods in this kit or are they stronger than oem?February 12, 2020
N F
10
Thank you for the inquiry. These parts are built to your vehicle's exact OEM specifications. They are not stronger but the same. Please let us know if you have any other questions.
February 12, 2020
Christa R
Will this fit with a 6 fab tech lift?March 2, 2020
Trea V
10
Thank you for your inquiry. All of the parts we offer are designed to be installed on unmodified vehicles. As your vehicle has a lift kit we cannot guarantee the fitment or functionality, nor provide the warranty for these parts. Please let us know if you have any further questions.
March 2, 2020
A C
Will this fit a 4 wheel drive model ?March 4, 2020
Warren H
10
Thank you for your inquiry. This will be correct for either drivetrain of the vehicles it is listed to fit. Please let us know if you have any further questions.
March 4, 2020
A C
Will this fit a 2007.5 chevy Silverado 2500 HD?March 9, 2020
K I
10
Thank you for your inquiry. This will be the correct fit for that vehicle. Please let us know if we can be of further assistance.
March 9, 2020
A C
What is the manufacturer on these parts?March 10, 2020
HARRY W
10
1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. Please let us know if you have any other questions.
March 11, 2020
Curtis L
Are the a frame arms aluminum?July 16, 2020
Jeffrey P
10
Thank you for your question, Keith! These control arms are made of steel.
July 16, 2020
T I
Will it fit a 2003 chevy silverado 2500hd 4x4 crew cab?August 9, 2020
Antonio R
10
Thank you for your inquiry! Yes, according to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!
August 9, 2020
Jessica D
What all does this kit do?September 18, 2020
First Name V
10
This kit would replace some of your steering and suspension parts. Please let us know if you have any questions!
September 18, 2020
Emma F
Will this fit an 03 3500 4x4, Dually ?September 24, 2020
Warren H
10
Thank you for your inquiry. This kit will fit either the 2003 Chevy Silverado or 2003 GMC Sierra 3500 regardless of single vs. dual rear wheels and 4WD vs. 2WD. Please let us know if you have any further questions.
September 24, 2020
A C
Does this come with all new bolts?October 10, 2020
James M
10
Thank you for your inquiry. New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition. Please let us know if you have any other questions.
October 11, 2020
Adam G
Are the Upper Control Arms adjustable?November 10, 2020
B R
10
These upper control arms will not come as being adjustable and should come the same way as the original equipment parts.
November 10, 2020
Emma F
Do the lower control arms have grease zert fittings?February 20, 2021
David M
10
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
February 22, 2021
Jessica D
Will this kit work on 2012 Yukon Denali?March 17, 2021
Ross J
10
Hello, These parts are listed for 2012 GMC Yukon XL 2500 with 3 Groove Pitman Arm.
March 17, 2021
Ricale A
Does this fit 2006 1500 z71 (4*4) Silverado ?November 26, 2021
Samue R
10
Hello, this is listed to fit 2006 Chevrolet Silverado 1500 HD
November 26, 2021
Ricale A
Will this fit with the rough country leveling kit ?December 20, 2021
Daniel S
10
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
December 20, 2021
Ricale A
Will this fit a 2009 Silverado 2500 HD duramax?December 23, 2021
Juan P
10
Hello, this kit is listed to fit 2009 Chevrolet Silverado 2500 HD with 3 Groove Pitman Arm
December 24, 2021
Ricale A
Do the control arms have bushings in them?January 13, 2022
Clarence E
10
Yes, the control arms will have bushings in them.
January 13, 2022
Emma F
10
Yes they come complete.
January 14, 2022
David S
What is the thread pitch of the ball join bolt?January 27, 2022
Samantha W
10
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
January 28, 2022
Emma F
10
The upper ball joint is M12x1.75 and the lower is M16x2.0. Since there can be variation with different brands of replacement parts, we cannot guarantee others will have the same measurements.
January 28, 2022
Daniel F
Will this kit work with a truck that has a 4 suspension lift?June 5, 2022
Chris D
10
No these will not work on a vehicle with a 4" lift.
June 6, 2022
T I
Will this kit fit 2011 chevy 3500hd dually?September 13, 2022
Neal R
10
This is not the correct part for your vehicle, but we do carry the one you need. The correct part number is: PSA69591.
September 13, 2022
Emma F
Will fit on 2008 gmc 3500 hd 6.6 duramax 4x4 dually?September 19, 2022
Lorenzo M
10
Yes, this part will fit your vehicle.
September 19, 2022
Cristina P
How do I know if I need a 3 or a 4 groove pitman arm? I have a 2002 GMC Sierra HD 4x4 SLE. I see both kits state they will fit.November 19, 2022
Michael N
10
Can you confirm if you have a Sierra 1500 HD or a 2500 HD?
November 21, 2022
Jessica D
Will these parts work on a lifted vehicle? I have a 3 inch lift kitDecember 10, 2022
Jacque S
10
No, our suspension parts will not be compatible on vehicles that have been modified with a lift.
December 15, 2022
Jessica D
Are the parts greaseable?March 9, 2023
Gene R
10
Yes
March 10, 2023
Joshua W
10
Everything fits perfect. Great quality at the right price and a warranty. Highly recommended.
March 10, 2023
James R
10
I believe the ball joints are but the rest are not
March 10, 2023
J O
10
Thank you for your inquiry! Yes, they are .
Product Features
Application Specific Design: No modifications necessary
Anti-Corrosion Coated: Enhanced surface life
Pre-greased: No additional maintenance required
Kitted for Restored Performance: Improved road-feel and handling
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
March 10, 2023
Jean O
10
No most aren't. Honestly if I did it over again I would buy Moog parts
March 12, 2023
Jon S
10
No
March 13, 2023
Devin C
I got the 2007 hd 4x4 new body style will fit??March 13, 2023
Nicandro O
10
What is the full year, make and model of your vehicle?
March 14, 2023
T I
10
Hi mine is a 08 Chevy Silverado 2500hd and all parts fitted
April 7, 2023
Adonis G
Will this fit a 2004 chevy 2500 hd extended cab duramax ?March 15, 2023
Jeffrey G
10
This kit is listed to fit 2004 Chevrolet Silverado 2500 HD models that are equipped with a 3 Groove Pitman Arm.
March 15, 2023
Jessica D
Will these fit my 02 duramax 4x4?May 13, 2023
John A
10
Please provide your 17-digit VIN so we can confirm fitment, thank you.
May 16, 2023
Jessica D
Will these parts fit a 2009 chevy silverado2500 4x4?October 2, 2023
Hernan S
10
This kit is listed to fit all 2009 Chevrolet Silverado 2500 HD models that are equipped with a 3 Groove Pitman Arm.
October 5, 2023
Jessica D
Will this fit 2008 Chevy Silverado RWD LS 2500HD?October 28, 2023
JAMES P
10
It fit my RWD 2008 silverado 3500 dually LT
October 29, 2023
Adam S
10
Yes, this part will fit your vehicle as long as you have a 3 groove pitman arm.
October 31, 2023
Emma F
10
There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
October 31, 2023
Nick R
Are TRQ parts manufactured in China?April 7, 2024
John D
Will this fit dual rear wheel trucks?July 2, 2024
Blake P
10
This kit is not specific to models with dual rear wheels or single rear wheels. Please provide your 17-digit VIN so we can confirm fitment, thank you.
July 10, 2024
Jessica D
Will this fit my 2006 Silverado 1500HD 2wd?August 24, 2024
Daniel G
10
No, this kit is specific to models with 4WD.
August 26, 2024
Jessica D
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.