Replaces

1999-04 Jeep Grand Cherokee Wheel Bearing & Hub Assembly Pair TRQ BHA53308 - 1ASHS00015

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair

Specifications:

  • Comes as a PAIR
    • Includes both the LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 bolt flange
  • Direct replacements
  • Fits 5 Lug Wheels
  • Studs already installed
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53915 Axle / Spindle Nut Torque Specification

  1. step : Install the new hub (0:30)
    • Use a wire brush to clean up the steering knuckle
    • Install the hub and hand thread on the bolts.
    • Torque the bolts to 65 ft lbs, rotating between the bolts, tightening a little bit around and around so the hub goes in evenly.
    • Put the hub nut and washer in, tighten but do not torque all the way just yet.
  2. step : Assemble the brake (3:20)
    • Put the rotor back on on, putting a lug nut on just to keep it from jumping around on you while you put the caliper back together.
    • Bolt the caliper bracket back on.
    • Install the brake pads, using a little anti-seize grease on the mounting edges.
    • Compress the caliper with a C-clamp and install it onto the bracket and bolt it in.
    • Torque the hub nut to 175.
    • Have someone in the car put the car in four wheel drive and in gear and hold down the brakes while you do this.
    • Install the hub washer, retainer and cotter pin.
  3. step : Put your wheel back on. (7:20)
    • Put the wheel on and use a star pattern to hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.
    • Pump the brakes a few times to re-compress the caliper pistons.

Tools needed for replacement:

    General Tools

  • Hammer
  • Wire Brush
  • Jack Stands
  • Sledge Hammer
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers
  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - SAE

  • 3/4 Inch Socket
  • 11/16 Inch Socket

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Great parts
The parts came with fast shipping and great quality. Plus shipping was free.
October 25, 2017
Very reasonable price and super easy installation, thanks to 1A Auto s helpful tutorial videos.
November 19, 2017
Wheel bearing and hub Assembly
Was an amazing price for the parts. The parts come fast in the mail.Fit perfect for my jeep it was nice that there was a video to show u how to replace the parts. For beginners it would be very very helpful.
March 22, 2018
Easy peasy
The parts were perfect! Fit like a glove and thanks to the videos it took 1 hr per side! Only way to go.
April 9, 2018
Exactly what I needed!
So far, so good! Excellent parts at a great price! Love 1A!
June 13, 2018
nice and clean
You will get new merchandise here , no reman. stuff.This company has helped me out greatly.Thxs A1
October 24, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does these work with the Quadra drive models?
Kevin P October 19, 2018
Yes nicely
Kevin M October 19, 2018
This is able to fit for quadra drive.
Emma F October 19, 2018
Wok with that model. They were hard to get the old ones out because of rust in the wheel bearing area
Roy G October 19, 2018
Does this item include abs sensor and is it compatible with 2wd option?
Matthew E November 10, 2018
Sensor is not included, just cross check the part number for the 2wd
H O November 10, 2018
You will need to reuse your abs sensor. I got a email to answer a question. Im not sure what model you selected but mine was for 4wd. But being a solid axel front end i dont see why it wouldnt work for 2wd. You just wouldnt put a half shaft in the splines.
A N November 11, 2018
no this item does not include the ABS sensor and yes it is compatible with 2wd option. I purchased this item for a 2004 grand cherokee.
Dale R November 11, 2018
I don’t think it is for 2wd as this one has spline for drive shaft and your 2wd has a smooth spindle. I am sure they carry the one u need. Good wrenching
R D November 11, 2018
Yes, this item is compatible with both 4WD and 2WD applications. The part would not include an ABS sensor harness as a tone ring is used for the ABS feature.
Jessica D November 12, 2018
Year Make Model Description
1999-2004Jeep Grand Cherokee Jeep Grand Cherokee Front Wheel Bearing & Hub Assembly Pair TRQ
Part #: 1ASHS00015


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53308

How-to Video:

(08:17 min)