Replaces

1999-04 Jeep Grand Cherokee Front Driver or Passenger Side Wheel Bearing & Hub Assembly TRQ

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

Specifications:

  • Fits either LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 bolt flange
  • Direct replacement
  • Fits 5 Lug Wheel
  • Studs already installed
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

BHA53915 Axle / Spindle Nut Torque Specification

  1. step : Install the new hub (0:30)
    • Use a wire brush to clean up the steering knuckle
    • Install the hub and hand thread on the bolts.
    • Torque the bolts to 65 ft lbs, rotating between the bolts, tightening a little bit around and around so the hub goes in evenly.
    • Put the hub nut and washer in, tighten but do not torque all the way just yet.
  2. step : Assemble the brake (3:20)
    • Put the rotor back on on, putting a lug nut on just to keep it from jumping around on you while you put the caliper back together.
    • Bolt the caliper bracket back on.
    • Install the brake pads, using a little anti-seize grease on the mounting edges.
    • Compress the caliper with a C-clamp and install it onto the bracket and bolt it in.
    • Torque the hub nut to 175.
    • Have someone in the car put the car in four wheel drive and in gear and hold down the brakes while you do this.
    • Install the hub washer, retainer and cotter pin.
  3. step : Put your wheel back on. (7:20)
    • Put the wheel on and use a star pattern to hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.
    • Pump the brakes a few times to re-compress the caliper pistons.

Tools needed for replacement:

    General Tools

  • Hammer
  • Wire Brush
  • Jack Stands
  • Sledge Hammer
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers
  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - SAE

  • 3/4 Inch Socket
  • 11/16 Inch Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Just like OEM
The hub fits just like the OEM hub I had put on the other side. Side to side you really cant tell the difference. The seal is nicely installed. I am ASE master certified with ocd. The first chirp I heard from the old bearing I hopped right on to 1aauto and glad I did. Saved money and would recommend to anyone considering it.
April 6, 2018
Great Experience
1A Auto, was a great place to buy my parts. Much Much less money then my local Auto Parts store. Not only FREE Shipping, but it arrived fast!! Thanks 1A Auto!! I will be reordering!!
September 19, 2018
All parts have been awesome!
I have been buying from 1A for a while now and everything I have gotten has been awesome. I’ve ordered stuff for other people as well and it’s always been speedy shipping and great customer service. Don’t forget the killer prices! Would recommend 1A to anyone and I will be a life customer, thank you!
June 24, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this fit a 4wd?
Brian G May 16, 2017
Yes, this bearing will fit a 4x4 1999-2004 Jeep Grand Cherokee!
Tim K May 16, 2017

Fits the following Makes:

Year Make Model Description
1999-2004Jeep Grand Cherokee Jeep Grand Cherokee Front Driver or Passenger Side Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
Chicago Rawhide BR930335
Chrysler 52098679AB
Chrysler 52098679AC
Chrysler 52098679
Chrysler 52098679AD
Drive Tech America NT513159
GMB 720-0026
Green Ball 1007FW
MOOG Hub Assemblies 513159
Raybestos 713159
Raybestos Brakes 713159
SKF BR930335
Timken HA598679

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHF00040
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA53915