1AAHK00051-1999-04 Jeep Grand Cherokee Front 4 Piece CV Axle Shaft Set



2000 Jeep Grand Cherokee 4 Wheel Drive Front 4 Piece CV Axle Shaft Set

Guaranteed to fit 2000 Jeep Grand Cherokee

99-04 Jeep Grand Cherokee (Quadra-Drive) Front CV Axle Shaft & Hub Assembly Kit
$ 199.95
26% OFF
26% OFF
Part 1AAHK00051

Out of Stock




Vehicle Fit

Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Hub Assemblies
  • Bearing Type:   Ball Bearing
  • Quantity:   4 Piece

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories.

How to Replace Front Wheel HubBearing 99-04 Jeep Grand Cherokee PART 2

Created on: 2011-07-08

Check out this video to learn how to replace the front hub and bearing on your 99-04 Jeep Grand Cherokee. This is Part 2.

  1. step 1 : Install the new hub
    • Use a wire brush to clean up the steering knuckle
    • Install the hub and hand thread on the bolts.
    • Torque the bolts to 65 ft lbs, rotating between the bolts, tightening a little bit around and around so the hub goes in evenly.
    • Put the hub nut and washer in, tighten but do not torque all the way just yet.
  2. step 2 : Assemble the brake
    • Put the rotor back on on, putting a lug nut on just to keep it from jumping around on you while you put the caliper back together.
    • Bolt the caliper bracket back on.
    • Install the brake pads, using a little anti-seize grease on the mounting edges.
    • Compress the caliper with a C-clamp and install it onto the bracket and bolt it in.
    • Torque the hub nut to 175.
    • Have someone in the car put the car in four wheel drive and in gear and hold down the brakes while you do this.
    • Install the hub washer, retainer and cotter pin.
  3. step 3 : Put your wheel back on.
    • Put the wheel on and use a star pattern to hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.
    • Pump the brakes a few times to re-compress the caliper pistons.

Tools needed for replacement

  • General Tools

    Large C-Clamp


    Jack Stands

    Sledge Hammer

    Wire Brush

    Floor Jack

  • Materials, Fluids, and Supplies

    Brake Parts Cleaner

    Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

    Slip-Joint Pliers

    Lug Wrench

  • Ratchets & Related

    A Piece of Pipe (for leverage)

    Socket Extensions

    Torque Wrench


    1/2 Inch Breaker Bar

  • Screwdrivers & Related

    Pry Bar

    Flat Blade Screwdriver

  • Sockets - SAE

    3/4 Inch Socket

    11/16 Inch Socket

Installation Video
Watch video

Fits these Makes

Year Make Model Description
1999-2004Jeep Grand Cherokee Jeep Grand Cherokee 4 Wheel Drive Front 4 Piece CV Axle Shaft Set

Part Interchange

Brand Label Part Number
Cardone New 66-3301
Cardone New 66-3300
Cardone Select 66-3300
Cardone Select 66-3301
Chicago Rawhide BR930335
Chrysler 52098679
Chrysler 52098679AD
Chrysler 52098679AC
Chrysler 52098679AB
Drive Tech America NT513159
GMB 720-0026
GSP NCV82511
GSP NCV82510
Green Ball 1007FW
Hollander 447-02698R
Hollander 447-02699L
Hollander 538-01499
Jeep 5012748AB
Jeep 5012749AB
MOOG Hub Assemblies 513159
Raybestos 713159
Raybestos Brakes 713159
SKF BR930335
Timken HA598679

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
Loading reviews
4.58/ 5.0 12
Great quality products
March 24, 2019
Great quality. Parts arrived faster than expected and parts are great quality. Installed them and got me back on the road quick. Definitely would by from them again.
April 23, 2019
The parts were great quality and the service was fantastic I would definitely return again
Had to modify 1 of the shafts but for the price I didn't mind too much
July 15, 2019
For a 19 year old Jeep I was not going to spend money on a Napa or Autozone brand for 3 times the price. Only issue was the longer of the 2 shafts was 1 inch too long. Everything else matched up on the shaft but the spline side had 1 inch more of splined shaft. Luckily I have access to a liquid cooled band saw and I took care of the problem. 2 months later and no issues. Someone is going to get upset when they buy this and it doesn't fit. The price makes up for it.
Rapid delivery, quality-looking parts.
August 2, 2019
OEM boot was torn for several years, letting water and grim in and grease out. Not much more expensive to change out the hub/bearing and new axle with boot than just the boot (tried a split boot - retaining rings can't be installed with axle in place)...much improved peace of mind.
Fast and quality
October 3, 2019
Got the parts in less than two days. They fit and they were quality at a great price!!
Perfect fit
October 19, 2019
This set was just right. Great value and solid fit
Over all top quality online service
July 31, 2020
I bought the 4 piece CV axle and hub assembly for my 2001 Jeep Grand Cherokee.It did come with a longer shaft than the one I pulled out but with quick response back from their service department problem fixed.
Great parts at an awesome price
September 8, 2020
I would definitely recommend this product to others. I had to get axle seals in the front of my jeep grand cherokee, and you have to pull the axles and bearing hub assemblies off to do it. With this great package deal, I just put back in, the new axles w/ CV joints & new bearing hub assemblies. Thanks a bunch.
Good parts quick Delivery
October 17, 2020
Ok Michnicks, Easy replacement great parts, great price 5 Stars
Very happy
February 26, 2021
Very happy with product and delivery timm.instulation was ezey Product arrived no damage . All parts were a high quality
Cv Axle Shaft Set
March 9, 2021
Ordered a cv axle shaft set for my 2004 Jeep Grand Cherokee. When Once I received my packages I inspected them. Everything I needed to do the job was included. My parts were all brand new in plastic packaging inside the boxes. Along with my parts a instruction sheet was included, which also gave me the torque specifications. I was definitely satisfied with my purchase, and will order from them again
Not so good this time around
March 24, 2021
Good price,fast delivery, good quality. The problem was that the axel shafts were not the correct lengths. Apparently there are different axel lengths for the same year jeep. There was nothing on the website mentioning this. Not sure how to remedy this.
Customer Q&A
Are the hubs included with this kit the same as the TRQ hubs sold separately?
April 7, 2019
Yes the hubs included in this kit are the same TRQ hubs that can be purchased under 1ASHS00015.
April 7, 2019
As far as I can tell they are identical to ones I have purchased separately from TRQ/A1 Auto, though there may be some internal design differences not apparent to the naked eye. Only the manufacture would be able to answer on that level.
April 10, 2019
I have a 99 jeep grand Cherokee 45rfe4.7 w/ quadra trac II will these parts work?
February 2, 2020
This kit is only able to fit if you have a QUADRA-DRIVE 4WD vehicle. Please do not hesitate to contact us with any further questions.
February 2, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC. See all trademarks.

1999-04 Jeep Grand Cherokee Front 4 Piece CV Axle Shaft Set TRQ-1AAHK00051 does not fit your:

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2000 Jeep Grand Cherokee with these options.