Replaces

1999-04 Honda Odyssey Exterior Door Handle Front Pair - 1ADHS00804

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Black
  • Quantity:   Pair
  • Front or Rear Location:   Front
  • Finish:   Smooth - Paint to Match

These replacement exterior door handles are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) and RH (Passenger Side) FRONT DOORS
  • Primed Black (Paint To Match) Finish
    • Can be installed as is or painted by buyer to any color desired
  • Replaces dealer part numbers: 72140-S0X-A11ZD, 72140-S0X-A11ZE, 72140-S0X-A11ZG, 72180-S0X-A11ZD, 72180-S0X-A11ZE, 72180-S0X-A11ZG, 72140S0XA11ZD, 72140S0XA11ZE, 72140S0XA11ZG, 72180S0XA11ZD, 72180S0XA11ZE, 72180S0XA11ZG
  • Durable construction
  • Built to strict quality control standards

These exterior door handles are great replacements and have good cost savings over dealer units.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:52)
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Pry up the window switch panel by hand
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harnesses
    • Pull the door handle forward and out
    • Disconnect the latch cables from the door handle
    • Disconnect the door lock wiring harness
    • Pry off the mirror base trim piece with a flat blade screwdriver
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the speaker lead
    • Pop off the clip holding the water shield
    • Carefully lower the water shield
    • Remove the rubber plug on the door
  2. step : Removing the Door Handle (3:16)
    • Remove the 10mm bolts from the door handle
    • Remove the Phillips screw
    • Pry up the yellow clip
    • Disconnect the lock rod
    • Slide the door handle forward
    • Rotate the handle out and push the bracket up to remove the handle
    • Disconnect the lock rod from the door handle with a flat blade screwdriver
    • Pry the bushing off the lock rod
    • Pry up the lock mechanism clip with a flat blade screwdriver
    • Remove the metal bracket
  3. step : Installing the New Door Handle (5:32)
    • Insert the retaining clip to the door handle
    • Insert the bracket onto the door lock
    • Insert the lock rod bushing into the yellow clip
    • Snap the rod into place
    • Insert the door handle into place and slide it forward
    • Replace the Phillips screw to the lock mechanism
    • Reattach the lock road to the yellow clip
    • Replace the 10mm bolts to the door handle
    • Push the rubber plug into the door
    • Test the door handle
  4. step : Installing the Door Panel (8:10)
    • Replace the water shield
    • Push on the water shield clip
    • Connect the speaker lead
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the latch cables to the door handle
    • Connect the door lock wiring harness
    • Push the door handle in place
    • Connect the lock switch to the switch panel
    • Connect the window switch to the switch panel
    • Push the switch panel into place
    • Insert the Phillips screw to the door pull
    • Insert the Phillips screw to the door handle
    • Push on the trim piece in the door pull
    • Push on the trim piece in the door handle
    • Replace the base mirror trim piece
    • For more detailed instructions, please see the 2003 Honda Odyssey door panel replacement video

Tools needed for replacement:

    General Tools

  • Flashlight
  • Putty Knife

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2004Honda Odyssey Honda Odyssey Pair Front Exterior Door Handle Black Smooth - Paint to Match
Part #: 1ADHS00804


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:01 min)