1999-02 Honda Odyssey Window Regulator Pair - 1AWRK00530

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Quantity:   Pair
  • Operation:   Power

These replacement Window Regulators are just what you need to get your vehicle in good shape again!


  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT DOORS
  • Includes the power window motors
  • Replaces dealer part numbers: 72250-S0X-A04, 72250S0XA04, 72210-S0X-A04, 72210S0XA04
  • Power operation
  • 4 Terminal plugs
  • Direct replacements
  • Built to strict quality control standards

These Window Regulators make good replacements and have substantial cost savings over the dealer units.


  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.


  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.


  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:44)
    • Pry up the screw cover inside the door pull with a flat blade screwdriver
    • Pry up the screw cover inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw from the door pull
    • Remove the Phillips head screw from the door handle
    • Pry the window switch panel off with a flat blade screwdriver
    • Disconnect the wiring harnesses from the window switch
    • Pull the door handle forward and off
    • Unclip the latch rod from the door handle
    • Disconnect the door lock wiring harness
    • Pry off the mirror base trim panel with a flat blade screwdriver
    • Pry the door panel off by hand
    • Lift the door panel up and off
    • Disconnect the speaker wiring harness
  2. step : Removing the Window Regulator (2:53)
    • Remove the Phillips screws from the window control box
    • Remove the two Phillips screws from the control box bracket
    • Pry off the rubber plugs with a flat blade screwdriver
    • Peel back the watershield
    • Raise the window by hand to access the bolts
    • Remove the two 10mm bolts that hold the window to the regulator
    • Raise the window
    • Hold the window in place with painter's tape
    • Disconnect the window motor wiring harnesses
    • Remove the Phillips screw from the window motor plate
    • Remove the wiring connectors from the plate with pliers
    • Remove the seven 10mm bolts from the window regulator
    • Pull the window motor up and out
    • Pull the regulator out of the door
  3. step : Installing the New Window Regulator (5:36)
    • Remove the bolts from the old regulator
    • Install the bolts into the new regulator
    • Put the new regulator into place
    • Hang the regulator in place by the top bolt
    • Hang the window motor in place by its bolts
    • Pull the window motor wiring harness through the door
    • Tighten the seven 10mm bolts into the regulator
    • Clip the wiring connectors to the motor plate
    • Connect the wiring harnesses
    • Put the plate into place
    • Insert the Phillips screw into the plate
    • Remove the painter's tape from the window
    • Slide the window down onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Connect the window switch wiring harness
    • Turn on the ignition
    • Test the window with the switch
    • Turn off the ignition
    • Disconnect the window switch wiring harness
    • Put the watershield into place
    • Insert the rubber plugs
    • Put the window control box bracket into place
    • Insert the two Phillips screws into the control box bracket
    • Put the control box into place
    • Insert the two Phillips screws into the control box
  4. step : Reinstalling the Door Panel (8:01)
    • Connect the speaker wiring harness
    • Lift the door panel into place
    • Push in the door panel clips
    • Push the mirror base trim piece into place
    • Connect the door lock wiring harness
    • Clip the latch rod to the door handle
    • Push the door handle into place
    • Connect the window switch wiring harnesses
    • Push the window switch panel into place
    • Insert the Phillips screw into the door handle
    • Insert the Phillips screw into the door pull
    • Put on the screw cover in the door handle
    • Put on the screw cover in the door pull

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great product.
The parts were perfect and the video on U tube was just what I needed to do it all myself. I would definitely recommend this product and your company.
January 18, 2018
worked great
These went in just great using an install video off YouTube. Did both windows for less than $100, when the auto shop wanted over twice that per side to do. Took me about an hour and half to do them.
April 15, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2002Honda Odyssey Honda Odyssey Front Power Window Regulator with Motor Pair
Only 5 left in stock
Part #: 1AWRK00530

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:50 min)