1998-05 Volkswagen Passat Window Regulator - 1AWRG00579

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power


  • RH Passenger side FRONT
  • Replaces dealer part number: 3B1837462, 3B1 837 462
  • Fits front door on 4 door models
  • Commonly called Regulator Module by Volkswagen
  • Does Not include window motor


Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Pull (1:05)
    • There's a little inner panel on the door pull. Using a flat blade screwdriver, pry that out right in the middle and take it out carefully.
    • Using your flat blade screwdriver, pry up the back of that door pull panel. The sides and front of the panel are secured with clips, so pull them up.
    • On the bottom side of the panel, there is a connector. Just press a tab and pull the connector free.
  2. step : Detaching and Removing the Outer Door Panel (1:39)
    • After removing the door pull, you'll notice there are three Phillips screws that hold the panel to the door.
    • In addition to those three, there are two T25 Torx screws on the bottom of the panel that hold it to the door.
    • While being careful not to drop them, remove the three Phillips screws.
    • Then remove the two T25 Torx screws from the bottom.
    • The panel is now held on by a number of clips along the sides and bottom. Using a door panel clip tool, or a putty knife, pry the bottom and sides of the panel away from the door.
    • Pull the panel up and out slightly.
    • To disconnect the door handle, pull the door handle out a little bit as you're opening the door. Push the small hook up and slide it through.
    • After your door handle is disconnected, there's a series of harnesses which all have small tabs. Push down on the tabs and pull the connector out.
    • The only difference is the courtesy light at the bottom of door which has small ears that you need to pry out with a screwdriver and pull them down.
  3. step : Securing the Window (4:40)
    • Pull the window up, stopping a few inches below the top of the frame.
    • Secure the window with some painter’s tape.
  4. step : Removing the Harnesses (5:10)
    • There are several clips holding the wiring harness in place against the door panel. Remove these clips, and then disconnect all the harnesses.
    • For the window motor harness, there is a tab which you pull down before pulling off the harness.
  5. step : Detaching the Window (4:50)
    • On the door panel, you'll see two circular black covers. Pop those out, and you'll see one 10 mm bolts under each. These bolts hold the window to the regulator.
  6. step : Removing the Interior Door Panel (6:16)
    • Remove all the 10 mm bolts along the edge of the door panel.
    • Once the bolts are out, take your flat blade screwdriver and start prying the panel away from the door.
    • Around the door lock, there are two rivets that hold it to the door panel. Push those through with a screwdriver.
    • Directly below these rivets, there is a tab for the wire harness. Squeeze the tabs, and push it through.
    • Take your door harness, push it through and lift your panel up and over your door lock.
    • Finally, there is a harness connection down the bottom with a tab on the left. Using your flat blade screwdriver to push the tab down, pull the connector off.
    • Once you get it off, pull that connector through, and make sure you feed your inside door handle cable through and bring it out the backside of the panel.
  7. step : Removing the Window Motor from the Door Panel (8:23)
    • Place the panel on a flat surface with the motor side down, and you'll see three T25 Torx screws holding the gear and motor to the panel. Remove those, and pop the motor out the bottom.
  8. step : Removing the Speaker (10:15)
    • The speaker is held on with four tiny rivets. Using a skinny punch, know the center of the rivet out. Taking your drill and aquarter inch drill bit, slowly drill the rivet out. Pry the speaker from the panel.
  9. step : Replacing the New Window Motor (8:58)
    • Taking your new motor, slide it under the panel, and make sure the motor faces up and away. Place the gear back on top, making sure the wires don't come out. Replace the screws, and tighten them firmly.
  10. step : Replacing the Speaker (11:08)
    • Using a small bolt and a nut, take the speaker and attach it to the new panel.
  11. step : Transferring the Plugs and Clips (11:29)
    • Pull the plugs out. For the clips, there are small ears on the backside of the panel. Squeeze those and push the clips out the front. Then reinstall on your new panel.
  12. step : Reinstalling the Window Assembly (12:00)
    • Pull your door lock up through the panel.
    • Reaching in behind the panel, pull your door latch cable through the panel.
    • Pull your wiring harness out from behind the panel.
    • Taking the door lock connector, push it through the hole closest to the door lock and reconnect.
    • Put your panel in place, and begin replacing the bolts.
    • Reconnect the power window motor and put the rest of the harnesses back in their places.
    • Finally, you can tighten up the bolts
  13. step : Reattaching the Window (14:46)
    • Put your key in the car, and, using the power window switch, move the regulator to a position where you can get to the two 10 mm bolts.
    • While holding the window, remove the tape and carefully slide it down into place. Make sure it's seated well.
    • Then tighten these two bolts.
    • Test the window to make sure everything is working properly.
  14. step : Replacing the Outer Door Panel (16:19)
    • First, reconnect the wires from the harness.
    • Next, for your door handle, replace the hook and pull it back into place.
    • Push the door panel closer. Put your lock up through the panel.
    • Making sure you have your power window and lock harness, push the panel into place and lock the top.
    • Pop all your clips back into the door, and put the lower two T25 screws back in. Replace the three Phillips screws in the middle of the panel.
    • Reconnect the window switch and press down in place and make sure you lock it in there well.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T25 Torx Driver

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Replacement Parts Window Regulator
I was very impressed how easy it was to order from A1 Auto and the speed of the delivery of the part for my VW Passat. The window regulator was easily installed and work great.
September 26, 2017
as advertised
the window regulator from 1aauto fit my 2002 passat with no issues and their installation video really helped with the installation
November 7, 2018
1998 vw passat
Window regulator fit great like new. DIY video help with installation About 30 min start to stop. Will order more parts when needed
November 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2005Volkswagen Passat VW Passat Front Power Window Regulator without Motor Passenger Side
Part #: 1AWRG00579

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(19:08 min)