Replaces
Frequently bought together
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1A Auto.com. The right parts installed correctly; that's going to save you time and money. Thank you and enjoy the video.
In this video we're going to show you how to replace the heater in the A/C blower motor on this 2000 Lincoln town car, same as any '98 to '02. Tools you'll need are an 8-millimeter socket with a ratchet and extension. My vehicle did have a 10-millimeter bolt on it as well but I don't think that that was original. Start out by moving your washer bottle. This is an 8-millimeter bolt here; remove that. I'm using a ratchet extension 8-millimeter socket. As you can see, my inner fender's broken so actually I'm just going to pull this right out. Hopefully yours comes out a little easier. I'm just going to move my water bottle right over here. Now you can see we have pretty easy access to the fan motor. Your lead is right here. Just pull back on a tab here. Disconnect the lead. Pull this tube down. You can see there's a bolt there, a bolt there. There is a bolt down further on most cars. Mine is missing; it looks like this has probably been replaced before and I'll show you how to get to that.
Right up underneath there's an 8-millimeter bolt right here. You want to remove that. I'm just going to go up in there with my 8-millimeter socket and my ratchet. We'll just fast forward through that. Okay, get that bolt out. Now what you want to do is kind of lift up on your inner fender and move it over a little bit. Now you can see your fender's not on that lip so you can push it down. Most likely what I would do is if that bolt was still down there, I'd push down on my fender and then it's possible to reach down in there and get it. Since I don't have it, I'm going to move this 8-millimeter bolt. I'm pretty sure that they should be all 8-millimeter, although my car has a 10-millimeter bolt there, which is probably because this was replaced already and somebody lost the correct bolts.
For this bolt I switch to a 10-millimeter socket and a extension and ratchet and we'll speed it up. Now what you're going to do is push the fender down and pull your fan up and out. New assembly from 1A Auto is just like the old one. I'm just going to remove this tube and swap it over. Then go back the same way. I push my fender down and get it in. Put the fender back up. Pull the fender up with your hands and get it back in place. This bolt here... this bolt over here. Let me tighten this bolt. Put my lead back in. This is screwed back on. Move that wiring back. There's a little tab where the washer bottle goes into on the fender. Make sure that goes in. This, I'm just going to kind of stuff down in there because it's broken, which you would obviously want to bolt yours in. Now take our bolt, tighten it in, and tighten it up. We're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HMA84848
