1998-02 Honda Accord Radiator & A/C Condenser Cooling Fan Assembly Pair - 1ARFK00001

Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market!


  • Comes as a  PAIR
    • Fits LH (Driver Side) and RH (Passenger Side)
  • New, not rebuilt, electric motors
  • Geometrically designed plastic blades for optimal circulation and uniform balance
  • Plastic shrouds designed to ensure structural integrity and endurance for maximum performance
  • Performance tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation
  • NOTE: This is a Denso style replacement. NOT correct for Valeo application

Now you can buy a high quality cooling fan assembly that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Testing the Fans (0:51)
    • Start the vehicle
    • Turn the A/C on
    • Both fans should run
    • If one does not run, then it should be replaced
    • If neither runs, check the relay and fuse
  2. step : Removing the Radiator Overflow Bottle (1:08)
    • Pull the radiator overflow hose out of its clip
    • Disconnect the radiator overflow hose from the radiator
    • Pull out the radiator overflow bottle
    • Disconnect the A/C fan wiring harness
  3. step : Removing the A/C Fan (2:06)
    • Pry off the A/C fan wiring clip with a flat blade screwdriver
    • Remove the 10mm bolts from the A/C fan shroud
    • Remove the 10mm bolts from the radiator brackets
    • Slide the fan wiring in between the fan and the radiator
    • Pull the fan out past the radiator hose
  4. step : Installing the New A/C Fan (3:29)
    • Push the new fan into place using the locating tabs
    • Start the two 10mm bolts into the fan shroud
    • Move the radiator into place
    • Insert the 10mm bolts into the radiator brackets
    • Tighten the 10mm bolts into the fan shroud
    • Push the wiring back onto its clips
    • Connect the wiring harnesses
  5. step : Reinstalling the Radiator Overflow Bottle (5:44)
    • Push the radiator overflow bottle into place
    • Push the radiator overflow hose onto its clip
    • Connect the radiator overflow hose to the radiator

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2002 Honda Accord Radiator & A/C Condenser Cooling Fan Assembly Pair L4 2.3L with Denso Style Radiator Fan

This part replaces:

  • OE # 19015PAAA01
  • OE # 19030PAAA01
  • OE # 19020PAAA01
  • Partslink HO3115103
  • Hollander 674-58804
  • Dorman 620-227
  • Partslink HO3113106
  • Hollander 674-58807
  • Dorman 620-229
Part #: 1ARFK00001

Order must be placed by 4pm ET

How-to Video:

(06:15 min)