1ABFS02211-1998-02 Ford Lincoln Mercury Front & Rear Ceramic Brake Kit

Replaces

1999 Ford Crown Victoria with Rear Phenolic Piston Calipers with 1 Inch Pad Clip Front & Rear Ceramic Brake Kit

1ABFS02211-1005279-1999
Guaranteed to fit: 1999 Ford Crown Victoria

Fit Details

  • Front or Rear Location: Front & Rear
  • Vehicle Brake Option: with Rear Phenolic Piston Calipers with 1 Inch Pad Clip

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Front Brake Rotor Diameter: 12.44 in. (316mm)
  • Rear Brake Rotor Venting Type: Solid
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug
  • Rear Brake Rotor Diameter: 11.22 in. (285mm)
  • Brake Pad Features & Benefits: OE Grade Multi-Layer Shim
  • Brake Pad Features & Benefits: Positive Mold Technology
  • Brake Pad Features & Benefits: Environmentally Compliant
  • Brake Pad Features & Benefits: Thermal Scorched
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • Reference Number CD748
  • Reference Number CD674A
  • Hollander 530-01985
  • Hollander 533-02327
FREE SAME DAY SHIPPING
Save 33%
List: $227.95 Save: $75.00
Part 1ABFS02211
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11537

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Ceramic
  • Front Brake Rotor Diameter:   12.44 in. (316mm)
  • Front Brake Rotor Venting Type:   Vented
  • Rear Brake Rotor Diameter:   11.22 in. (285mm)
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors
      (2) Rear Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (1:06])
    • Pry off the center cap with a flat blade screwdriver
    • Retrieve the center safety bolt key from the glove box
    • Remove the center safety bolt with the key
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:44)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:41)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:55)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (5:14)
    • Slide the rotor on
    • Thread one lug nut by hand to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Make sure the caliper bracket slides move smoothly
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (6:51)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket with the notches on the upper side
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to between 15 - 16 foot-pounds
  7. step : Reattaching the Wheel (8:59)
    • Turn the wheels straight
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Put on the wheel cover bracket
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
    • Put the center safety bolt in with the key
    • Push on the center cap
  8. step : Testing the Brakes (9:44)
    • Return the center safety bolt key to the glove box
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 13mm Socket
  • 21mm Socket


Fits the following Makes:

Year Make Model Description
1998-2002Ford Crown Victoria Ford Crown Victoria with Rear Phenolic Piston Calipers with 1 Inch Pad Clip Front & Rear Ceramic Brake Kit
1998-2002Lincoln Town Car Lincoln Town Car with Rear Phenolic Piston Calipers with 1 Inch Pad Clip Front & Rear Ceramic Brake Kit
1998-2002Mercury Grand Marquis Mercury Grand Marquis with Rear Phenolic Piston Calipers with 1 Inch Pad Clip Front & Rear Ceramic Brake Kit

Part Interchange

Brand Label Part Number
Aimco 54027
Aimco 54060
Bendix PRT5191
Bendix PRT5109
DuraGo BR54060
DuraGo BR54027
Raybestos EHT674AH
Raybestos MGD748CH
Raybestos EHT748H
Raybestos Brakes MGD748CH
Raybestos Brakes EHT674AH
Raybestos Brakes EHT748H
Raybestos Brakes 66744
Raybestos Brakes 66595
Wagner BD125514
Wagner BD125481

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11537
Product Reviews
4.75/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
1
0
0
0
Brake pads
Back of brake pads metal broke as soon as the mechanic installed them. Cheap metal on brakes. Other than that rotor perfect and stabilizers links perfect.
July 27, 2017
Brake Kit.
GREAT VALUE ! WAS COMPLETE AND PERFECT FIT, HIGH QUALITY. COULD NOT BE HAPPIER.
June 6, 2018
Perfect Fit
Right parts at the best price. Job went smooth.
March 22, 2019
1A Auto is outstanding with products & Very Fast Shipping.
Thanks so much for the super fast Shipping of the brake pads kits . Fantastic products and speedy Shipping.
April 28, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will these brake kit fit my 02 crown Vic police interceptor?
Juan H September 4, 2018
This brake set will fit models that have rear phenolic piston calipers and 1 Inch Pad Clips.
Tim K September 4, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company. See all trademarks.

1998-02 Ford Lincoln Mercury Front & Rear Ceramic Brake Kit-1ABFS02211 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 1999 Ford Crown Victoria with these options.