Replaces

1998-02 Chevy Prizm Toyota Corolla Window Regulator - 1AWRG01039

Part Details

  • Regulator Option: with Motor
  • Operation: Power

Specifications:

  • RH (Passenger Side) FRONT DOOR
  • Power operation
  • Direct replacement
  • Includes power window motor
  • Built to strict quality control standards

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (1:00)
    • Remove the Phillips screw in the door latch
    • Pry up the door latch and unclip the latch rod.
    • Use a flat blade screwdriver to pry up the top of the door pull and the switch panel.
    • Unplug the switch panel from the wiring harness.
    • Remove all the now-exposed Phillips screws.
    • Pry off the door panel and pull it up and over the lock.
    • Carefully peel back the water shield.
  2. step : Remove the power window regulator (3:24)
    • Remove the stamp plate secured by two screws.
    • Disconnect the window motor lead.
    • Unbolt the seven 10 mm bolts secure the window regulator and motor.
    • Carefully lower the window and regulator, making sure you don’t cut your fingers.
    • Unbolt the window from the regulator by maneuvering the bolts securing the window to the regulator in front of the access ports in the door.
    • Pull the window up and out, tilting it inwards towards the body of the vehicle to remove it.
    • Pull the window regulator out.
  3. step : Install the new regulator. (6:50)
    • Slide the regulator into the door and start threading in the nuts and bolts.
    • Tighten the 10 mm bolts with your socket and ratchet.
    • Plug in the switch panel to the wiring harness to move the window regulator up and down so you can access the window anchor points.
    • Lower the window down into the regulator and bolt it in.
    • Test that the window goes up and down ok.
    • Unplug the switch plate.
    • Screw the stamp plate back in and replace the water shield
  4. step : Install the door panel (10:20)
    • Hang the door panel up, make sure your lock button comes through the top.
    • Once you get it hang up, you can look in behind and line up the clips.
    • Feel the pin and then hole, push it in.
    • Make sure that you have your lock rod and your harness coming through, and then install the two Phillip screws that hold near the armrest base.
    • Now you can reinstall the armrest, just push it down, lock it into place.
    • Reconnect your power window switch, slide the back end first then push the front down into place.
    • Reinstall your door handle, push it in, push it back, then walk it into place and then put the screw back in.
    • The trim panel, it goes up top near the mirror and then the little clip in the back to hold it.

Tools needed for replacement:

    General Tools

  • Flashlight

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

3.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
1
Window regulator was NOT "high quality".
The whole thing was packed very well in the box. That was the only thing done well. The motor was wired backwards. I had to remove the pins in the connector and reinstall them the other way. The operator uses round plastic slides. The original uses square slides in the channel. The round slides made the window loose in the door frame. The oprator clicks as it goes up through the motion. It can clearly be heard clicking as it goes up. The other operator for the drivers door I got from 1A Auto was perfect. So it's a manufacturer/supplier issue. I got a poorly assembled and built window operator .
August 16, 2017
Purchased
1 year ago
Very Pleased
The window regulator arrived quickly, in perfect condition, and I was able to install it without a hitch. I have great confidence in ordering from 1A Auto.
February 12, 2017
Purchased
over 2 years ago
Works fine, but not identical to original
I bought one of these for a 2001 Corolla. The video was quite helpful to save me a bit of futzing around. Total install time, excluding trip to the hardware store, was less than an hour.

This part is different than the original Toyota part. In the picture of this part, you can see that there is one arm with two studs. In the original part, that arm is longer, is connected behind the spring (black coiled thing in the middle), and has two threaded holes. Perhaps this design is nicer, as it allows the scissor action to work without running the motor and thus makes it easy to pass through the hole in the door. The down side is that it cost me a trip to the hardware store to buy a couple of nuts.

If the nuts were included in the package, it would have been five stars.
July 10, 2016
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1998-2002Chevy Prizm Chevy Prizm Front Power Window Regulator with Motor Passenger Side
1998-2002Toyota Corolla Toyota Corolla Front Power Window Regulator with Motor Passenger Side

This part replaces:

  • Partslink TO1351125
  • Hollander 125-58684R, 125-58676R w/Motor
  • Dorman 741-802
  • TYC 660093
  • OE # 6980102040
Only 3 left in stock
Part #: 1AWRG01039


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:52 min)