Replaces

1998-02 Chevy Prizm Toyota Corolla Window Regulator - 1AWRG01038

Specifications:

  • LH (Driver Side) FRONT DOOR
  • Power operation
  • Direct replacement
  • Includes power window motor
  • Built to strict quality control standards

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the door panel (1:00)
    • Remove the Phillips screw in the door latch
    • Pry up the door latch and unclip the latch rod.
    • Use a flat blade screwdriver to pry up the top of the door pull and the switch panel.
    • Unplug the switch panel from the wiring harness.
    • Remove all the now-exposed Phillips screws.
    • Pry off the door panel and pull it up and over the lock.
    • Carefully peel back the water shield.
  2. step : Remove the power window regulator (3:24)
    • Remove the stamp plate secured by two screws.
    • Disconnect the window motor lead.
    • Unbolt the seven 10 mm bolts secure the window regulator and motor.
    • Carefully lower the window and regulator, making sure you don’t cut your fingers.
    • Unbolt the window from the regulator by maneuvering the bolts securing the window to the regulator in front of the access ports in the door.
    • Pull the window up and out, tilting it inwards towards the body of the vehicle to remove it.
    • Pull the window regulator out.
  3. step : Install the new regulator. (6:50)
    • Slide the regulator into the door and start threading in the nuts and bolts.
    • Tighten the 10 mm bolts with your socket and ratchet.
    • Plug in the switch panel to the wiring harness to move the window regulator up and down so you can access the window anchor points.
    • Lower the window down into the regulator and bolt it in.
    • Test that the window goes up and down ok.
    • Unplug the switch plate.
    • Screw the stamp plate back in and replace the water shield
  4. step : Install the door panel (10:20)
    • Hang the door panel up, make sure your lock button comes through the top.
    • Once you get it hang up, you can look in behind and line up the clips.
    • Feel the pin and then hole, push it in.
    • Make sure that you have your lock rod and your harness coming through, and then install the two Phillip screws that hold near the armrest base.
    • Now you can reinstall the armrest, just push it down, lock it into place.
    • Reconnect your power window switch, slide the back end first then push the front down into place.
    • Reinstall your door handle, push it in, push it back, then walk it into place and then put the screw back in.
    • The trim panel, it goes up top near the mirror and then the little clip in the back to hold it.

Tools needed for replacement:

    General Tools

  • Flashlight

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
1
0
0
0
Followed right along with video- was a snap to install, and saved me a LOT of $$$. Had only one issue that the call center helped easily with. THANKS!!!
December 30, 2011
Window Regulator Driver Side Front
Pros: I watched the install video, which really helped !
The install went fine, took about 1 hour. The track and motor is well design. Tested several times smooth operation.

Cons: the only little problem was that i needed 2 10mm bolts to secure the bottom of the track.This version has studs , quick visit to Home Depot to care of the issue.
April 22, 2016
Almost perfect
Two of the attachment points required a bolt, not a nut, as shown in the image. No big deal. Just fyi.

The price and the shipping were absolutely the best. The how-to video helped *a lot*.
I would very much recommend this to a friend.
July 8, 2017
Purchased
10 months ago
Window Regulator Driver Side Front
Pros: I watched the install video, which really helped !
The install went fine, took about 1 hour. The track and motor is well design. Tested several times smooth operation.

Cons: the only little problem was that i needed 2 10mm bolts to secure the bottom of the track.This version has studs , quick visit to Home Depot to care of the issue.
April 22, 2016
Purchased
over 2 years ago
Saved a couple hundred bucks
Dealer was trying to charge me $560 to install this thing. It wasn't easy and it really wasn't hard. Just putting 2 &2 together. 1aauto. I will keep ordering from them because price is competitive to others online and they have great instructional videos....can't beat it!
January 2, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2002 Chevy Prizm Front Power Window Regulator with Motor Driver Side
  • 1998-2002 Toyota Corolla Front Power Window Regulator with Motor Driver Side

This part replaces:

  • OE # 6980202040
  • Partslink TO135012
  • Hollander 125-58684L
  • Dorman 741-801
  • Hollander 125-58676L
  • TYC 660094
Part #: 1AWRG01038

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(11:52 min)