Specifications:

  • LH (Driver Side)
  • Replaces dealer part number: 33551S84A01, 33551 S84 A01
  • Mounts on quarter (1/4) panel
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards
  • Does not include bulbs or wiring
  • Does not include failure sensor
    • failure sensor will have to be transferred over from the original
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight (0:21)
    • Remove the screw clip by pulling out the center and then the rest.
    • Pull back the insulation.
    • Twist all of the sockets out of the taillight assembly.
    • To replace a bulb pull the bulb out and push the new one in. Twist the socket back in.
    • Remove another clip on the plastic panel and pull the insulation further back.
    • Remove the three 8mm nuts.
    • Pull the light out and off.
  2. step : Replacing the Taillight (2:19)
    • Line up the light and push it into place.
    • Twist in the sockets.
    • Replace the three 8mm nuts.
    • Replace the insulation.
    • Replace the clips.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2000 Honda Accord Sedan Outer Tail Light Driver Side

This part replaces:

  • Partslink HO2800121
  • Hollander 166-58959L
  • OE # 33551S84A01
  • TYC 11-5040-01-1
  • DEPO 317-1923L-UF
Part #: 1ALTL00344

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:15 min)