• LH (Driver Side) REAR DOOR
  • Includes the power window motor
  • Replaces dealer part numbers: 69804-AA010, 85720-AA030, 69804AA010, 85720AA030
  • Direct replacement
  • Built to strict quality control standards

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: with Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove door panel. (0:55)
    • For more detailed instructions see our other videos.
  2. step : Remove Regulator (1:42)
    • Remove the door handle by removing the 10mm bolt.
    • Remove the plate with the 3 phillips screws.
    • Carefully remove the water shield.
    • Take care not to rip it, as it keeps water from getting into your door.
    • Plug your power windows back in and tape it up.
    • Lift up the window and tape it up out of the way.
    • Remove your power window harness.
    • Remove the bolts with your wrench or socket and ratchet.
    • Take out the motor and the regulator.
  3. step : Install the new regulator (4:35)
    • Attach the new motor to the regulator using the bolts that came with it.
    • Replace the regulator and motor back into their original positions.
    • Feed the harness back through.
    • Bolt the track back in.
    • Tighten the regulator bolts and your power window motor bolts.
  4. step : Test the regulator (6:00)
    • Test the to make sure the wiring is hooked up correctly.
    • Untape and bolt in the window.
    • Test again to make sure the window isn’t straining and everything works.
  5. step : Test the regulator (6:00)
    • Test the to make sure the wiring is hooked up correctly.
    • Untape and bolt in the window.
    • Test again to make sure the window isn’t straining and everything works.
  6. step : Re-assemble the door panel (7:13)
    • Replace the water shield.
    • Reassemble the door panel.
    • For more detailed instructions refer to our other videos.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T27 Torx Driver

4.5 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Window motor.
Fits perfectly. Smooth operation. Cam in on time. In good condition. Easy to install.
August 12, 2018
1 month ago
Toyota Camry Window Regulator Driver Side Rear
I was 100% satisfied with the regulator. It fit and functioned perfectly. And the videos were great for how to dissect the Toyota doors
August 14, 2017
1 year ago
You get what you pay for
1AAuto guarantees this part to fit. And indeed it did fit. Installation was pretty much as shown in the video although the video was for a front door whereas this part was a rear door. The video failed to describe how to remove the plastic trim piece around the door latch which also holds the door panel in place. Took me over an hour to get this piece off.
Installation was straightforward. After everything was back together the moment arrived to test my work. This is where my dissatisfaction started. The motor on the 1AAuto part was wired backwards. Lift the switch up, window goes down. Push switch down, window goes up. With no safety cutoff on the motor, pushing the switch down on a closed window will result in the motor burning itself out. Apparently the Chinese definition of quality control is different from ours. I see this as a serious problem. I suggest testing the motor before installation and reversing the wiring if necessary. But, on a quality part, it shouldn't be necessary.
July 20, 2017
1 year ago
Good price and prompt delivery - works smooth
The only problem we had with the operation of the window is that it seems to be wired backward. We have to push the control switch down for the window to go up and up for the window to go down. Is there an easy fix on this without taking the whole door cover off? I can live with this ok but it may be a safety hazard for people who have children in the back seat.
Thank you, Dave Abel - Heath, Ohio
July 17, 2017
1 year ago
Response from 1A Auto
We are sorry to hear the wiring is backwards. To fix this, you would need to take off the door panel and rewire the prongs on the motor's connector. Please call us at your convenience if you would like us to look into our current stock and issue a replacement pending approval with appropriate wiring.
July 17, 2017
Alex P Staff
great part easy installation
The window regulator replacement went in beautifully. Everything lined up perfectly. The 1A Auto tutorial was helpful in that it demystified the process, I am not a mechanic but I sure felt like one after completing the repair.
July 15, 2017
1 year ago
Good part good price
Found my window regulator here for one third of the price of anybody else. It was easy too install after watching installation video on YouTube. "Very happy"
July 10, 2017
1 year ago
reverse polarity
Works fine but the polarity is reversed. I had to reverse the wires from the connector.
July 3, 2017
1 year ago
Works like the original!
My mechanic had no problem putting this part on the car. The window rolled up and down just like it did before the original part broke.
February 19, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2001Toyota Camry Toyota Camry Rear Power Window Regulator with Motor Driver Side

This part replaces:

  • Hollander 135-58330L
  • Dorman 741-829
  • Partslink TO1550114
  • TYC 660392
  • OE # 85720AA030
  • OE # 69804AA010
Part #: 1AWRG00340

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:16 min)