1ADHS01467-1997-01 Toyota Camry Lexus ES300 Front Driver & Passenger Side 2 Piece Exterior Door Handle Set

Replaces

1997-01 Toyota Camry Lexus ES300 Front Driver & Passenger Side 2 Piece Exterior Door Handle Set TRQ

1ADHS01467

Part Details

  • Color: Beige
  • Set Quantity: 2 Piece

This part replaces:

  • TRQ DHA33069
FREE SAME DAY SHIPPING
Save 17%
List: $47.95 Save: $8.00
Part 1ADHS01467

Out of Stock

Free GROUND SHIPPING

Close



TRQ
Brand #: DHA33069
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   2 Piece
  • Color:   Beige

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Door Panel (0:38)
    • Pry off the trim piece inside the door handle
    • Pry off the trim button on the arm rest
    • Pry off the trim button on the door panel
    • Pry up the switch panel
    • Disconnect the window switch wiring harnesses
    • Pry off the sail panel
    • Remove the three Phillips head screws on the arm rest
    • Remove the two Phillips head screws on the bottom of the door panel
    • Remove the Phillips head screw in the top left corner
    • Remove the Phillips head screw from the door handle
    • Pry off the door handle bezel
    • Pop out the bottom of the door panel
    • Pull the door panel up and off
    • Carefully remove the water shield
  2. step : Removing the Interior Door Handle (3:01)
    • Remove the Phillips head screw from the door handle
    • Pull off the metal latch rods from the door handle
    • Remove the metal plate
    • Carefully pry off the weather shield
  3. step : Removing the Exterior Door Handle (4:24)
    • Connect the window switch
    • Turn the key to the run position
    • Raise the window
    • Disconnect the door handle latch rod
    • Pry the door latch rod from the door handle
    • Remove the safety latch from the lock rod
    • Push the lock rod out of the door handle
    • Remove the two 10mm bolts from the door handle
    • Lift the door hand up and out
    • Remove the 10mm screw from the lock cylinder
    • Remove the lock cylinder from the door handle
  4. step : Installing the Exterior Door Handle (6:37)
    • Insert the lock cylinder into the new door handle
    • Insert the door handle into the door
    • Tighten the 10mm screws to the door handle
    • Insert the lock rod into the lock cylinder
    • Close the clip on the lock rod
    • Insert the door handle rod into the door handle
    • Close the latch onto the rod
    • Press the watershield to the inside of the door
  5. step : Installing the Interior Door Handle (8:23)
    • Insert the metal shield into place
    • Tighten the three Phillips screws to the shield
    • Insert the lock rod into the door handle
    • Insert the hooks into the door and slide the handle back
    • Tighten the Phillips screw to the door handle
  6. step : Reinstalling the Door Panel (9:42)
    • Lift the door panel into place
    • Push in the door panel clips
    • Tighten the two Phillips head screws at the bottom
    • Tighten the three Phillips head screws to the arm rest
    • Tighten the Phillips head screw to the top left of the door panel
    • Connect the window switch wiring harness
    • Press the window switch into place
    • Insert the door handle trim bezel into place
    • Tighten the Phillips screw to the door handle trim
    • Press the trim bezel inside the door handle in

Tools needed for replacement:

    General Tools

  • Pick

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1997-2001Lexus ES300 Lexus ES300 Front Driver & Passenger Side 2 Piece Exterior Door Handle Set
1997-2001Toyota Camry Toyota Camry Front Driver & Passenger Side 2 Piece Exterior Door Handle Set

Part Interchange

Brand Label Part Number
DIY Solutions BHS03105
DIY Solutions BHS01202
DIY Solutions BHS01203

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: DHA33069
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


1997-01 Toyota Camry Lexus ES300 Front Driver & Passenger Side 2 Piece Exterior Door Handle Set TRQ-1ADHS01467 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.