1AWRG00093-1997-01 Toyota Camry Front Passenger Side Power Window Regulator

Replaces

1997-01 Toyota Camry Front Passenger Side Power Window Regulator TRQ

1AWRG00093

Part Details

  • Operation: Power
  • Regulator Option: with Motor

This part replaces:

  • Partslink TO1351124
  • Hollander 135-58330R
  • OE # 69801AA020
  • OE # 6980133010
  • OE # 85710AA020
  • TRQ WRA51133
FREE SAME DAY SHIPPING
Save 26%
List: $75.95 Save: $20.00
Part 1AWRG00093
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: WRA51133

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Door Panel (0:38)
    • Pry off the trim piece inside the door handle
    • Pry off the trim button on the arm rest
    • Pry off the trim button on the door panel
    • Pry up the switch panel
    • Disconnect the window switch wiring harnesses
    • Pry off the sail panel
    • Remove the three Phillips head screws on the arm rest
    • Remove the two Phillips head screws on the bottom of the door panel
    • Remove the Phillips head screw in the top left corner
    • Remove the Phillips head screw from the door handle
    • Pry off the door handle bezel
    • Pop out the bottom of the door panel
    • Pull the door panel up and off
    • Carefully remove the water shield
  2. step : Removing the Interior Door Handle (3:01)
    • Remove the Phillips head screw from the door handle
    • Pull off the metal latch rods from the door handle
    • Remove the metal plate
    • Carefully pry off the weather shield
  3. step : Removing the Window Regulator (4:25)
    • Disconnect the window motor lead
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the two 10mm bolts from the regulator
    • Remove the two 10mm bolts from the motor brace
    • Pull the window regulator out through the door
  4. step : Reinstalling the Regulator (8:52)
    • Lubricate the upper and lower tracks with white lithium
    • Lubricate the teeth with white lithium
    • Push the regulator into the door
    • Insert one of the bolts into the window regulator
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the motor brace
    • Insert the two 10mm bolts into the regulator
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Reconnect the window motor
    • Hook up the regulator to the window switch and test the regulator
  5. step : Installing the Interior Door Handle (14:49)
    • Insert the metal shield into place
    • Tighten the three Phillips screws to the shield
    • Insert the lock rod into the door handle
    • Insert the hooks into the door and slide the handle back
    • Tighten the Phillips screw to the door handle
  6. step : Reinstalling the Door Panel (17:02)
    • Lift the door panel into place
    • Push in the door panel clips
    • Tighten the two Phillips head screws at the bottom
    • Tighten the three Phillips head screws to the arm rest
    • Tighten the Phillips head screw to the top left of the door panel
    • Connect the window switch wiring harness
    • Press the window switch into place
    • Insert the door handle trim bezel into place
    • Tighten the Phillips screw to the door handle trim
    • Press the trim bezel inside the door handle in

Tools needed for replacement:

    General Tools

  • Pick

  • Materials, Fluids, and Supplies

  • White Grease
  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1997-2001Toyota Camry Toyota Camry Front Passenger Side Power Window Regulator

Part Interchange

Brand Label Part Number
Dorman 741-720
Partslink TO1351124
Toyota 69801AA020
Toyota 69801-AA020

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: WRA51133
Product Reviews
4.60/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
1
0
0
Good but definitely not perfect
This was not modeled directly after the oem part. Its a little more loosey goosey and not as robust. I dont recall, but it did not seem to align exactly (perhaps), but in frustration, I undid the new motor from the assembly and attached it to the old assembly. I was only able to align two out of the 3 wholes required, but it works fine for now. If you can just get the motor, probably recommend doing that and using your old assembly. Happy with A1 overall though!
January 11, 2016
Perfect fit
The part worked out like a charm! My car window is working again! Thank you
July 26, 2017
Window motor.
Window regulator with motor arrived on time and in good condition. Fits perfectly in my car. Easily installed and operated smoothly.
August 12, 2018
Toyota
Easy. Great product and fit! Saved 600$ From getting it done at the dealership
September 10, 2018
Perfect fit
This is the third window I have bought from 1A and installed in my vehicles. All have installed perfectly and the videos are top notch help. All parts I have bought from 1A have worked a well as the original factory parts.
February 12, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


1997-01 Toyota Camry Front Passenger Side Power Window Regulator TRQ-1AWRG00093 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.