Replaces
Part Details
Highest Quality Materials
Made from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the blower motor resistor in this 2005 GMC Savana, same as any 1996 to present Savana, as well as the Chevy Express. The blower motor resistor, when it goes bad, you'll start losing speeds on your blower. For example, you might have speed one and four, but not two and three. It's pretty easy. All you need is a 7/32 inch socket and a ratchet.
The first thing you want to do, is you can see there's a connector right here, and, as you follow these wires, there's another connector right back here. What you want to do, is you want to unplug both of those so just pry up on the tab, pull the connector out, and then, you want to do the same thing on the other connector. Just unhook the wires from that little hook, up top, there, and pull them down and set it aside. You can see there are two 7/32 inch bolts and we'll just fast forward as he removes those. Once the bolts are removed, you can just pull the resistor right out.
To install the new one, you just want to push the resistor down into place and replace those two 7/32 inch bolts. You can see, he just tightens them by hand, first, and then, using the socket and ratchet, he tightens them up. Now you just want to connect those connectors. Make sure you put the red and black wire back up on that hook, and the connectors just push right in and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
