1ABFS00706-1996-02 Ford Lincoln Mercury Rear Semi-Metallic Brake Kit

Replaces

1999 Ford Crown Victoria with Rear Steel Piston Calipers with 1-3/4 Inch Pad Clip Rear Semi-Metallic Brake Kit

1ABFS00706-638250-1999
Guaranteed to fit: 1999 Ford Crown Victoria

Fit Details

  • Front or Rear Location: Rear
  • Vehicle Brake Option: with Rear Steel Piston Calipers with 1-3/4 Inch Pad Clip

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Venting Type: Solid
  • Rear Brake Rotor Diameter: 11.22 in. (285mm)
  • Brake Pad Features & Benefits: OE Grade Multi-Layer Shim
  • Brake Pad Features & Benefits: Positive Mold Technology
  • Brake Pad Features & Benefits: Environmentally Compliant
  • Wheel Lug Count: 5 Lug
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • Reference Number MD674
  • Hollander 533-02327
FREE SAME DAY SHIPPING
Save 29%
List: $104.95 Save: $30.00
Part 1ABFS00706
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA10792

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Semi-Metallic
  • Rear Brake Rotor Diameter:   11.22 in. (285mm)
  • Kit Includes:
      (1) Rear Semi-Metallic Brake Pad Set
      (2) Rear Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:50)
    • Pry off the center cap with a flat blade screwdriver
    • Retrieve the center nut key from the glove box
    • Use the key to loosen the center nut
    • Pull off the wheel cover
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel cover bracket
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:21)
    • Check the thickness of the brake pads
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:50)
    • Remove the two 10mm bolts from the brake caliper
    • Pry off the caliper with a flat blade screwdriver
    • Pull the caliper aside
    • Pull the inner brake pad out of the caliper
    • Pry the outer brake pad off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:49)
    • Apply penetrating oil to the wheel studs
    • Pull the rotor off
    • If the rotor will not come off, strike rotor with a hammer to loosen it
  5. step : Installing the New Brake Rotor (3:24)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
  6. step : Installing the New Brake Pads (3:41)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the caliper
    • Clean the brake pad slides with a wire brush
    • Check that the caliper slides move freely
    • Apply grease to the caliper slides, if necessary
    • Put the caliper on
    • Thread the two 10mm bolts by hand
    • Tighten bolts to between 12 - 15 foot-pounds
  7. step : Reattaching the Wheel (6:50)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Put the wheel cover bracket into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 - 120 foot-pounds in a crossing or star pattern
    • Put the wheel cover into place
    • Tighten the center nut with the key
    • Reattach the center cap
    • Return the center nut key to the glove box
  8. step : Testing the Brakes (7:39)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Wire Brush
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket

  • Wrenches - Metric

  • 12mm Wrench
  • 11mm Wrench
  • 10mm Wrench


Fits the following Makes:

Year Make Model Description
1996-2002Ford Crown Victoria Ford Crown Victoria with Rear Steel Piston Calipers with 1-3/4 Inch Pad Clip Rear Semi-Metallic Brake Kit
1996-2002Lincoln Town Car Lincoln Town Car with Rear Steel Piston Calipers with 1-3/4 Inch Pad Clip Rear Semi-Metallic Brake Kit
1996-2002Mercury Grand Marquis Mercury Grand Marquis with Rear Steel Piston Calipers with 1-3/4 Inch Pad Clip Rear Semi-Metallic Brake Kit

Part Interchange

Brand Label Part Number
Aimco 54027
Bendix PRT5109
DuraGo BR54027
Raybestos Brakes SP674PPH
Raybestos Brakes MGD674MH
Raybestos Brakes EHT674H
Raybestos Brakes SGD674M
Raybestos Brakes 66595
Wagner BD125481

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA10792
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Accuracy
Every time I have placed an order it was delivered quickly and the parts were an exact replacement.
March 23, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company. See all trademarks.

1996-02 Ford Lincoln Mercury Rear Semi-Metallic Brake Kit-1ABFS00706 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 1999 Ford Crown Victoria with these options.