This replacement tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • RH (passenger's side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

This tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Changing a Bulb (0:48)
    • Remove the two Phillips screws securing the taillight.
    • Pull the taillight out.
    • Twist the socket counterclockwise.
    • Pull the bulb straight out.
    • Push the new one in.
    • Twist the socket clockwise.
  2. step : Removing the Taillight Assembly (1:41)
    • Remove the Phillips screw in the luggage shelf bracket.
    • Remove the bracket and pull the trim panel straight out.
    • Disconnect the harness connection.
    • Remove the ground bolt.
    • Pull the harness out.
  3. step : Replacing the Taillight Assembly (3:45)
    • Push the harness in.
    • Line up the taillight and push it into place.
    • Replace the two Phillips screws on the taillight.
    • Reconnect the harness.
    • Replace the bolt through the ground wires.
    • Push the trim back into place.
    • Replace the bracket and screw.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-2000 Toyota 4Runner Tail Light Passenger Side

This part replaces:

  • Partslink TO2801123
  • OE # 8155035121
  • Hollander 166-60269R
  • TYC 11-3209-90
  • DEPO 312-1923R-AS-L6
Part #: 1ALTL00224

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:24 min)