Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This is a power door lock actuator that mounts inside the door. It is designed to REPLACE a broken or missing unit.

Specifications:

  • Fits RH (Passenger Side) FRONT or REAR
  • Replaces dealer part numbers: 72115-S00-A01, 72115-S04-A02, 72115-S04-J02, 72115S00A01, 72115S04A02, 72115S04J02
  • Correct electrical connection
  • Direct replacement
  • Built to strict quality control standards
  • Fits 2 Door Coupe or 4 Door Sedan Models only

This power door lock actuator is built to strict quality control standards. It is a great replacement and has good cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (1:12)
    • Remove the two Phillips screws from the door pull
    • Use a flat blade screwdriver to pry out the door handle bezel.
    • Use a putty knife to carefully pry off the door panel and unclip the clips securing it.
    • Pull off the panel and unplug all the wiring
  2. step : Remove the door lock actuator (3:45)
    • Carefully pull aside the plastic water shield
    • Drill out the rivets securing the door lock actuator.
    • Unclip the lock rods and unplug the wiring harness
    • Transfer the mounting bracket and dust cover to the new lock actuator
  3. step : Install the new door lock actuator (5:40)
    • Use a couple coarse threaded bolts rather than rivets to re-install the door lock actuator
    • Plug in the wiring harness and lock rods.
    • Test your connections to make sure the doors lock and unlock properly.
  4. step : Re-install the door panel (7:00)
    • Put the water shield back into place.
    • Reconnect the speaker and light.
    • Thread the wiring harness back into place.
    • Clip the door panel back on.
    • Re-install the door handle bezel.
    • Plug in the control panel.
    • Bolt back in the door handle pull using your Phillips screwdriver.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 5/16 Inch Drill Bit

  • General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 4mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1996-2000Honda Civic Honda Civic 2 Door Coupe Door Lock Actuator Passenger Side
1996-2000Honda Civic Honda Civic 4 Door Sedan Rear Door Lock Actuator Passenger Side
Part #: 1ADLA00111


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:01 min)