Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair


  • Left Hand driver side and Right Hand passenger side
  • Includes lens and housing
  • Bulbs not included
Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Headlight Assembly (0:43)
    • Remove the three T15 screws that secure the headlight.
    • If the outside screws don’t come out:
    • Brake the tabs on the headlight and use pliers to hold the brass insert while removing the screws.
    • Twist and pull out on the bulb to change it.
  2. step : Replacing the Headlight Assembly (2:24)
    • Remove the shield over the bulb hole.
    • Put the bulb into the new headlight assembly.
    • Line the headlight up and push it into place.
    • Replace the three screws.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Torx Drivers & Sockets

  • T15 Torx Driver

4.33/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
great product!
September 23, 2011
Just as I ordered - Plastic a little thin
Overall this product is still 5 stars. It fit perfectly and was exactly as I ordered. Arrived on time and was packaged well. My only gripe was the plastic piece where the predrilled hole is that connects to the headlight mount is pretty thin and flimsy. Granted, I installed the headlights after the light had sat in the cold for a day or so. Let them warm up and you will be fine.
January 15, 2018
These headlights LOOK good but they do not throw as good a beam as the originals
I purchased these headlights to replace the original ones in my 1995 Dodge Intrepid. I was having to keep polishing the originals because the UV-protective coating had gone, under the exposure of the sun. Also, some crazing in the plastic itself was beginning to appear in one headlight. The replacements arrived quickly, and were well packaged. They LOOK really good and were pretty easy to install. One mounting ear cracked; that may have been my fault but the damage was easy to fix and since these headlights have a three-point mounting, ultimately inconsequential. However, the truth comes at night. The original 1995-1997 Dodge Intrepid headlights were none too good, with relatively weak illumination and a splotchy beam pattern. These replacements are even splotchier...the beam they throw is more uneven. They are acceptable but even the deteriorated original headlights threw a better beam. My work schedule requires driving in the dark either to or from the workplace about half my workdays, so good headlights are a constant safety issue. These are acceptable, especially given the enormous cost of originals from Mopar.
July 12, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1995-1997Dodge Intrepid Dodge Intrepid Headlight Pair
Part #: 1ALHP00005

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:54 min)