This replacement front UPPER control arm is just what you need to bring back the safety and integrity of your Dodge Ram's suspension and steering.

Specifications:

  • Fits either the RH (Passenger) or LH (Driver) Side FRONT UPPER
  • Replaces dealer part numbers: 52038751AC, 52038751AD
  • Includes new control arm bushings already installed
  • Stamped steel just as original
  • New, not remanufactured or refurbished
  • Fits 4x4 models with the Spicer 60 front axle or 4x2 3500 models with I-Beam axle
    • Does not fit models with the Spicer 44 front axle

Note: To determine which Dana Spicer front axle you have in your truck, the axle code is stamped into the lower LH (driver side) axle housing next to the cover as shown on attached picture illustration. It may also be on the white specification data sticker which is under the front section of the hood.

Worn control arm bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged front lower control arm with the loose bushings with our high quality all in one replacement.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1994-1999 Dodge Ram 2500 Truck 4 Wheel Drive with Spicer 60 Axle Front Upper Control Arm
  • 1994-1999 Dodge Ram 3500 Truck 4 Wheel Drive Front Upper Control Arm
  • 1994-1999 Dodge Ram 3500 Truck 2 Wheel Drive I-Beam Axle Front Upper Control Arm

This part replaces:

  • OE # 52038751AD
  • OE # 52038751AC
  • Hollander 511-00995
  • Dorman 520-366
Part #: 1ASFU00051