Replaces

1993-99 Nissan Altima Front & Rear Strut & Spring Assembly 4 Piece Set TRQ

Description
Vehicle Fit
Warranty & Shipping
Product Reviews
Q&A

Part Details

  • Quantity:   4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Great price, but not a perfect fit.
If your Altima is 02/‘96 or older, the inner tie rods will not fit with the steering kit, as can be seen in their separate Liston on this site. I did not pay attention to this at first and had to reorder - delayed my repair. Also, the struts have a little bracket sound the upper bolt hole, on the bottom / steering knuckle side that will not allow your stock bolt to enter. I modified this, which has voided my warranty, potentially. Overall, I am still very satisfied, given the price. Everything else fit fin on my 02/1996 Altima.
November 23, 2018
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1993-1999Nissan Altima Nissan Altima Front & Rear Strut & Spring Assembly 4 Piece Set

Part Interchange

Brand Label Part Number
Monroe 171943
Monroe 171944
Monroe 171942
Monroe 171941
Monroe Shocks & Struts 171941
Monroe Shocks & Struts 171944
Monroe Shocks & Struts 171942
Monroe Shocks & Struts 171943

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASSP00201
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA57011