Replaces

1993-98 Jeep Grand Cherokee Lift Support - 1ABHS00005

Is your hatch not staying open anymore?  The problem could be the lift supports mounted to the hatch.  These get weak over time and require replacing.  No need to lose money at the dealer for this simple do it yourself replacement.  Our lift supports are just what you are looking for to make your rear hatch, glass, or hood work correctly again.

This is for one support. We recommend replacing them in pairs. 

 

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Replace the tail gate lift struts (0:52)
    • Unbolt the two bolts anchoring it
    • Unclip the clip with a screwdriver and the strut falls out.
    • Reverse the process to install the replacement.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 7mm Socket
  • 6mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
HOW DO I CONNECT THE BRACKET IT COMES WITH TO THE LIFT SUPPORT ?
CHASE D on Jun 12, 2018
BEST ANSWER: This part is the Hatch Lift Support. This is for one support. We recommend replacing them in pairs.

Vehicle Fit

  • 1993-1998 Jeep Grand Cherokee Hatch Lift Support
Part #: 1ABHS00005

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:48 min)