Replaces

1993-97 Geo Prizm Toyota Corolla Exterior Door Handle - 1ADHS01092

These door handles are just what you need to get your vehicle in good looking form again!

Outside Door Handle Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Smooth Black Finish
    • Can be painted by the buyer to any color desired or installed as is
  • Durable construction
  • Steel center rods and return springs
  • Direct replacements
  • Fit 4 Door Sedan and Wagon Models only
Inside Door Handle Specifications:
  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Injection molded BLUE plastic
  • Direct replacements
  • Built to strict quality control standards

These door handles are great replacements and have good cost savings over the dealer units.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

  • These new handles are made in the original color shade.  Due to vehicle age and fading from the sun, our new handles may not match your existing handles or bezels exactly.  If you are looking for an exact match, we recommend replacing handles in pairs or sets.

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (4) Smooth Black Exterior Door Handles
  • Kit Includes: (4) Blue Interior Door Handles

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (0:27)
    • Remove the Phillips screw in the inside door handle.
    • Unclip the door latch rod.
    • Pry up the corner panel on the inside side of the side mirror.
    • With your screwdrivers, pry up the top of the door pull and remove the two Phillips screws.
    • Pry up the switch panel and unplug it.
    • Use a putty knife to unclip the door panel from the door.
    • Carefully peel back the water shield.
  2. step : Remove the outside door handle (2:30)
    • Unbolt the four 10 mm bolts and the one nut to remove the bracket in the door.
    • Reach into the door and unclip the lock and latch rods from the door handle.
    • Remove the two 10 mm bolts in the door handle.
    • Pull the lock cylinder out .
    • Remove the door handle.
  3. step : Install the new door handle (4:51)
    • Start bolting in the door handle, putting the lock cylinder in before you finish bolting down the far bolt.
    • Clip in the lock and latch rods to the door handle.
    • Bolt that bracket back in with your 10 mm socket and ratchet.
  4. step : Put the door panel back on (7:25)
    • Clip the door panel in, threading the wiring connectors through the door pull.
    • Fasten all the Phillips screws.
    • Plug in the wiring harness to the switch panel.
    • Clip the switch panel and top of the door pull down.
    • Connect the door latch with the lock and latch rods.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
1
0
0
Parts fit perfectly
I was expecting to have to wait 2 weeks for the delivery of my parts that I ordered, but amazingly, they arrived in about 4 days, and the tutorial website was great too. Thanks Alot!
April 8, 2018
Purchased
4 months ago
Not the best, but will work.
Not the greatest, as the color was to strong of a black. They look as if they will crack, as they have this indent running from top down. They work well, but come apart as you place them in, so you just need to be thinking of that as you get them in.
June 24, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1993-1997Geo Prizm Geo Prizm Front & Rear Exterior Door Handle 8 Piece Set
1993-1997Toyota Corolla Toyota Corolla LE Front & Rear Exterior Door Handle 8 Piece Set
1993-1997Toyota Corolla Toyota Corolla DX Front & Rear Exterior Door Handle 8 Piece Set
1993-1997Toyota Corolla Toyota Corolla CE Front & Rear Exterior Door Handle 8 Piece Set for Models with Manual Windows
1993-1997Toyota Corolla Toyota Corolla Base Model Front & Rear Exterior Door Handle 8 Piece Set

This part replaces:

  • Partslink TO1310102
  • Partslink TO1311102
  • Partslink TO1520105
  • Partslink TO1521105
  • OE # 6920512130J
  • OE # 6920612130J
  • OE # 6921012160
  • OE # 6922012160
  • OE # 6923012140
  • OE # 6924012140
  • OE # 94852495
  • OE # 94852496
  • OE # 94852497
  • OE # 94852498
  • Dorman 77422
  • Dorman 77423
  • Dorman 77462
  • Dorman 77464
  • Dorman 83631
  • Dorman 83632
Part #: 1ADHS01092


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:20 min)