Replaces

1993-03 Ford Ranger Interior Door Handle - 1ADHI00235

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Ford Ranger inside door handle is just what you need to get your Ford Ranger in good looking form again!

Specifications:

  • LH (Driver Side)
  • Replaces dealer part number: F37Z-1021819-A, F37Z1021819A
  • Direct bolt on replacement for original
  • Built to strict quality control standards

This inside door handle is a direct bolt on and is built to strict quality control standards. It is a great replacement and has good cost savings over a dealer unit.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:26)
    • Pry off the window crank cover with a flat blade screwdriver
    • Remove the T20 Torx bolt from the window crank
    • Pull off the window crank
    • Remove the two Phillips head screws inside the door pull
    • Pull off the door handle bezel
    • Remove the Phillips head screw behind the door handle bezel
    • Remove the Phillips head screw at the bottom of the door handle
    • Lift the door panel up and off
  2. step : Removing the Door Handle (1:53)
    • Punch out the door handle rivet with a hammer and punch
    • Drill out the rivet with a 1/4" drill bit
    • Pry off the rivet head with a flat blade screwdriver
    • Pull the door handle back and off
    • Carefully peel back the water shield
    • Peel the rubber protector off the door handle
    • Pry the latch cable out of the door handle with a flat blade screwdriver
  3. step : Installing the Door Handle (4:02)
    • Push the latch cable into the door handle
    • Push the rubber protector onto the door handle
    • Slide the door handle forward onto the door
    • Insert a coarse threaded bolt into the door handle to replace the rivet
  4. step : Installing the Door Panel (5:50)
    • Lift the door panel into place
    • Insert the Phillips screw into the bottom of the door panel
    • Insert the Phillips screw behind the door handle bezel
    • Push on the door handle bezel
    • Insert the two Phillips head screws inside the door pull
    • Push on the window crank
    • Insert the T20 bolt into the window crank
    • Push on the window crank cover

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 1/4 Inch Drill Bit
  • Drill

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1993-2003Ford Ranger Ford Ranger Interior Door Handle Driver Side
Part #: 1ADHI00235


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:58 min)