Replaces

1992-96 Toyota Camry Exterior Door Handle - 1ADHE00110

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement door handle is just what you need to get your vehicle in good looking form again!

Specifications

  • Passenger Side front door
  • Injected molded plastic
  • Black Finish
  • Direct replacement for original handle
  • Fits the front for 2 or 4 door vehicles

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove Door Panel (0:55)
    • Start the with the little panel at the top by the side mirror.
    • Remove the inside door handle bezel.
    • Remove the screw covers from the door panel
    • Remove the screws.
    • Unclip the pushclips on the side of the door.
    • Remove the door panel and disconnect the harness.
    • Disconnect the tweeter speakers if you have them.
    • Remove the plastic watershield.
    • Take care not to rip it.
  2. step : Remove the Door Handle (4:05)
    • Remove the little black piece of shielding to access the 10mm bolt.
    • Move the rod in the locking mechanism to the side.
    • Remove the two 10mm bolts and unclip the yellow clip and push the lock rod aside.
    • Pull the handle down and out.
  3. step : Installing the New Handle. (6:50)
    • Transfer the lock from the old handle.
    • Reconnect the lock rod.
    • Twist the handle in and push.
    • Bolt in your 10mm bolts.
    • Reclip the yellow clip.
  4. step : Put everything back together (9:47)
    • Put your watershield back on and check out our other videos for more detailed door panel installation instructions.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
96 Camry door handle
Part was high quality and easy to paint and install.
August 13, 2017
Video
The online video made the task easy and the part fit perfectly.
July 22, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
When I open my door panel theres a plastic shield blocking access to the 10mm bolts and clips?
Mike Z November 9, 2015
Just peel it back for access and press it back on when your finished
Donna G November 9, 2015
Hello, Yes this is called a water shield from the factory. Be careful because the have a tendency to tear. Its ok. Just use duct tape to patch if this happens. Its not structural.
Brian F November 9, 2015
Its been a while since I replaced this but I found watching the video the ultimate help tool.
30 something in spirit. 3 November 9, 2015
If you are referring to the plastic film/sheet that covers most of the door you can just peal it down and put it back up when you are done.
Mike B November 9, 2015
I have a 1999 Silverado 1500 new style body will the exterior handle for 2002 work on this truck? They look the same.
Rodney B November 27, 2015
Just peal it down and remove the bolts. It will re-stick easily.
L E July 4, 2017
Year Make Model Description
1992-1996Toyota Camry Toyota Camry Exterior Door Handle Front Passenger Side
Part #: 1ADHE00110


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:45 min)