1992-96 Toyota Camry Exterior Door Handle - 1ADHS01697

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Kit Includes:
      (4) Smooth Black Exterior Door Handles
      (4) Blue Interior Door Handles
      (4) Blue Interior Door Handle Bezels


  • Brand New Interior & Exterior Door Handle Set of 12
    • Fits LH (Driver Side) and RH (Passenger Side) Front & Rear
  • Direct replacement for original handles
  • Built to strict quality control standards

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

  • These new handles are made in the original color shade.  Due to vehicle age and fading from the sun, our new handles may not match your existing handles or bezels exactly.  If you are looking for an exact match, we recommend replacing handles in pairs or sets.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (0:55)
    • Pry off the corner trim panel.
    • Remove the bezel around your door panel by prying it up with a flat blade screwdriver.
    • Use your flat blade screwdriver to take off the four covers concealing Phillips screws.
    • Then remove the five Phillips screws with your screwdriver.
    • Remove the two push clips on the side of the door by depressing the center of the clip and pulling the body out.
    • Unclip the door panel and unplug the wiring harness.
  2. step : Remove the door handle (4:01)
    • Remove the three 10 mm bolts.
    • Unclip the lock and door latch rods.
  3. step : Install the door handle (5:21)
    • Clip the door lock and latch rods into the handle.
    • Bolt the handle down into the door with your 10 mm socket and ratchet.
  4. step : Put your door panel back on. (7:38)
    • Check out our other videos for more detailed instructions.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this item a complete set for all four doors of the 1994 toyota camry?
Olaoluwa M July 8, 2017
It was the complete set with all the door handles inside and out and we got them on with no problems and did it ourselves thanks to the video that 1A Auto shows on their website.
N A July 8, 2017
this set has everything but the screws which you will have to use from your own car. it was easy for me to install without having to pay a mechanic a load of money. each door took me about 20 mins after i got the hang of it. the back doors were alittle more tricky but i got everything on after watching the 1A auto videos that are on youtube. These handles fit my 94 Camry and my 93 Camry without any issues
N A July 8, 2017
Year Make Model Description
1992-1996Toyota Camry Toyota Camry Front & Rear Exterior Door Handle with &
Only 2 left in stock
Part #: 1ADHS01697

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:23 min)