1992-96 Lexus ES300 Toyota Camry Hood Lift Support Pair - 1ALSP00013

Part Details

  • Quantity: Pair

Is your hood not staying open anymore?  The problem could be the lift supports mounted to the hood and fenders.  These get weak over time and require replacing.  No need to lose money at the dealer for this simple do it yourself replacement.  Our lift supports are just what you are looking for to allow your hood to stay open correctly again.


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 53450-39065, 5345039065, 53450-39055, 5345039055, 53440-39065, 5344039065, 53440-39055, 5344039055
  • Built to strict quality control standards

This is for 2 supports. We recommend replacing them in pairs. 

Item Condition: New

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : remove the hood support strut (0:46)
    • Use a 12 mm combination wrench to remove the two 12 mm bolts.
    • Pull the strut out.
  2. step : Install the new hood support strut (1:39)
    • Line up the two studs and tighten down the nuts with your wrench.
    • Repeat on the other side.

Tools needed for replacement:

    Wrenches - Metric

  • 13mm Wrench
  • 12mm Wrench

4.7 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
almost like originals
Both sides fit perfectly. The right side was easily done. The how-to video did not mention the original left side has an extra bracket welded to hold an electrical connector. May be not all cars have this bracket. I have to chisel and pry to separate the bracket so that I can reuse it. An extra effort but worth it.
August 2, 2018
2 months ago
Response from 1A Auto
Thank you for leaving us a review for the lift supports you purchased! I am sorry that our video was no 100% accurate for your application. While we do our best to make the information provided in our videos we make no claims or promises that it will be the exact same procedure as your vehicle! That being said I am happy that we were able to provide you with parts at a good price and help save you money with our do-it-yourself video! - 1A Auto
August 2, 2018
Tim K
Perfect Fit!
I'm glad I found these after watching a YouTube video on how to install them. I'd ordered and looked for replacements for a long time, and didn't find any. These weren't hard to install. The only obvious difference is that you use a different-sized wrench to get the ball off the top (old units) than you do to install the new ball. Just make sure you're installing the "L" and "R" units (from the driver's perspective). I installed the top of one without checking, and had to take it back out because I didn't pay attention.
July 11, 2018
3 months ago
Easy to install
I've had to replace my hood shocks before and the top part fit perfectly into the existing post so all I had to do was unbolt the bottoms, install the hood shocks, and re-bolt them. They now hold up the hood just fine.
January 31, 2018
8 months ago
Camry Hood Lift Supports
Perfect fit, quick delivery, awesome install video. My Sister In Law was quite impressed. Whats not to like?
January 9, 2018
9 months ago
I had a good experience buying at a1 price, fast delivery and received the item in good condicion...thank you
August 7, 2017
1 year ago
Nice lifts, needed some adapting to the car.
I got great service from 1A Auto on these gas lifts for the hood of my 1996 ES300. The parts work very well, and their bottom brackets are the right shape and size for the car. However, the left lift in the car comes with an attached (brazed on) bracket to hold an electric relay. I had to chisel off the bracket from the original lift carefully (to preserve the bracket) and install it along with the new lifts. It works great now, but was a good bit of extra effort.
February 17, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-1996Lexus ES300 Lexus ES300 Hood Lift Support Pair
1992-1996Toyota Camry Toyota Camry Hood Lift Support Pair
Part #: 1ALSP00013

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:57 min)