Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • Left Hand (Driver Side)
  • Includes lens, housing, and mounting panel
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Hadnling the Bulbs (0:52)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Replace the bulbs (0:52)
    • Open the hood and reach behind the Headlight Assembly.
    • Remove the bulb by twisting and pulling it out.
    • Push the tab to unclip it from the harness.
    • Reverse process to install the new bulb.
  3. step : Remove the side marker light assembly (1:35)
    • Remove the Phillip's screw securing the side marker light assembly
    • Use a flat head screwdriver and a rag to pry out the parking light assembly
  4. step : Remove the grille (2:05)
    • Use pliers to remove the clips and the grille.
    • Set aside.
  5. step : Remove the head light assembly (2:40)
    • Unbolt the four bolts using your 10 mm socket and ratchet
  6. step : Install the new head light assembly (3:45)
    • Bolt the four 10 mm bolts back in using your socket and ratchet.
    • Clip the grille back into place and secure with the Phillips screws.
    • Clip the side marker light assembly back in
    • Screw in the screw using your Phillip's screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1994Toyota Camry Toyota Camry Headlight Driver Side
Part #: 1ALHL00566


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:13 min)