Replaces

1988-91 Oldsmobile Cutlass Supreme FWD Exterior Door Handle Pair - 1ADHS00078

This pair of replacement Oldsmobile Cutlass Supreme outside door handle has been redesigned and strengthened to correct the earlier breaking problem of the original units. It's just what you need to get your vehicle in good looking form again!

Specifications

  • Comes as a pair for the front doors
  • Durable metal construction
  • Flat black in color
  • Direct replacement for original handle
  • Comes with handle mechanism and pillar plate
  • Reuse your original lock cylinder
  • Correct for 2 door International Series vehicles

Note: Even though this door handle is correct for the International Series vehicles by being flat black in color, it will still work for all 88-97 2 door Supreme models.

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:07)
    • Remove the screws from the door panel
    • Pry off the lower door panel with a putty knife
    • Pry off the window switch with a putty knife
    • Disconnect the window switch wiring harnesses
    • Pry off the inner door handle with a putty knife
    • Disconnect the door handle
    • Pry off the door panel with a putty knife
    • Pull the door panel up and off
    • Remove the bolts from the seat belt
    • Remove the bolts from the door panel bracket
    • Pull off the door panel bracket
    • Disconnect the seat belt
    • Pull the seat belt aside
    • Peel back the water shield
    • For more detailed instructions, please see the 1992 Lumina door panel replacement video
  2. step : Removing the Outside Door Handle (2:38)
    • Connect the window switch wiring harnesses
    • Pry off the access hole plug with a flat blade screwdriver
    • Remove the two 10mm bolts from the outside door handle
    • Unclip the latch rod
    • Pull out the latch rod
    • Pull out the door handle
  3. step : Installing the New Outside Door Handle (3:51)
    • Hold the latch rod in place
    • Attach the door handle to the latch rod
    • Push the new handle into place
    • Clip on the latch rod
    • Insert the two 10mm bolts into the door handle
    • Test the door handle
    • Push on the access hole plug
  4. step : Reinstalling the Door Panel (7:00)
    • Disconnect the window switch wiring harnesses
    • Put the water shield into place
    • Connect the seat belt
    • Push on the door panel bracket
    • Insert the bolts into the door panel bracket
    • Put the seat belt into place
    • Insert the bolts into the seat belt
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the inside door handle
    • Push the door handle into place
    • Connect the window switch wiring harnesses
    • Push the window switch into place
    • Push the lower door pane into place
    • Insert the screws into the door panel
    • For more detailed instructions, please see the 1992 Lumina door panel replacement video

Tools needed for replacement:

    Allen Wrenches

  • 5/64 Allen Wrench

  • General Tools

  • Putty Knife

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket
  • 7mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T7 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
will this fit a a 93 cutlass supreme?
Jay F on Nov 8, 2017
BEST ANSWER: This part will not fit your vehicle. We do have potentially the correct handles, but they are specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

Vehicle Fit

Year Make Model Description
1988-1991Oldsmobile Cutlass Supreme FWD Olds Cutlass Supreme Front Exterior Door Handle Pair
Only 2 left in stock
Part #: 1ADHS00078


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:32 min)