1984-96 Chevrolet Corvette Rear Hatch Weatherstrip Seal Precision

Vehicle Fit
Warranty & Shipping
How-To & Tools

This Chevy Corvette rear window hatch seal is a new, aftermarket replacement weatherstrip that has the following specifications:


  • Fits rear window hatch
  • Brand new in the package
  • High quality reproduction
  • Made to strict quality control standards
  • Seals the rear glass hatch on Coupe models
  • Excellent reproduction of the original seal, that fits correctly

If your weatherstripping is causing leaks allowing damaging rain and irritating wind in, then this seal is for you. Why not replace your old, hardened, rotted seal with this new, ready to install weatherstrip and bring back the luster to your modern day muscle car - The CHEVY CORVETTE!!

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Disconnecting the Battery (0:48)
    • Disconnect the negative battery cable with an 8mm wrench
  2. step : Removing the Hatch Seal (0:55)
    • Remove the Phillips head screws from the rear hatch trim panel
    • Pull off the rear hatch trim panel
    • Loosen the Phillips screws from the remaining hatch trim panels
    • Pull off the hatch seal by hand
  3. step : Preparing the Hatch (2:37)
    • Clean the hatch seal channel with a shop vacuum
    • Clean the hatch seal channel with soapy water
    • Clean the hatch seal channel with mineral spirits
    • Scrape off any adhesive residue with a razor blade
  4. step : Installing the New Hatch Seal (3:59)
    • Unclip the hatch supports at the top
    • Have an assistant hold the hatch up
    • Position the seal
    • Push the hatch supports into place
    • Feed the hatch seal into the channel
    • Apply weatherstrip adhesive to the seal channel
    • Push the seal into the channel
    • Push the trim panels into place
    • Tighten the Phillips screws into the trim panels
    • Apply silicone lubricant to the hatch seal
    • Close the hatch
    • Keep the hatch closed to compress the seal
  5. step : Reconnecting the Battery (7:08)
    • Reconnect the negative battery cable with an 8mm wrench

Tools needed for replacement:

    General Tools

  • Assistant
  • Razor Blade / Gasket Scraper

  • Materials, Fluids, and Supplies

  • Soapy Water
  • Sponge
  • Mineral Spirits
  • Gasket Adhesive
  • Cloth Rags

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Vacuum

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1984-1996Chevrolet Corvette Chevrolet Corvette Coupe Rear Hatch Weatherstrip Seal

Part Interchange

Brand Label Part Number
DIY Solutions WSS01089

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
3.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Just what my 89 corvette needs
This hatch back gasket is just what my corvette needs to Renue its waterproofing ability. Mines toast. Thanks 1aauto
April 2, 2017
Hatch weatherstripping
I followed the direction of the video, and with alittle patience had it installed. Without their video I would been lost.
July 10, 2017
Weather stripping for 1995 corvette.
The weatherstrip main rear seal came in the box with no information or part specs. After spending an hour trying to get the seal to fit with no success I decided to measure the two seals and came to the conclusion that the seal I purchased from 1A Auto was 3 inchs too long. After calling the company and speaking to a ref they wanted me to take pictures of measurements of both the old seal in the news seal and send them to them so they could make me a new seal. Too much time and too much effort to put into something thats supposed to be GM manufacturer spec. I end up shipping the seal back and getting a refund
September 6, 2018
Part 1AWST00059

Out of Stock

Brand #: TS 108 SA