Replaces

1982-92 Chevy Camaro Pontiac Firebird Complete Weatherstrip Seal Kit - 1AWSK00309

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This GM F-Body Hardtop aftermarket replacement 11 PIECE weatherstrip kit includes the following pieces:

  • (2) Roofrail Seals: Seal the side glass to the body of the vehicle. Come with molded ends
  • (2) Door Seals: Seal the back, bottom, and front of the doors to the body of the vehicle.
  • (1) Rear Hatch Seal: Seals the rear hatch to the body of the vehicle.
  • (2) Outer Door Window Sweeps; Wipes door glass as it moves up and down
  • (2) Inner Door Window Sweeps: Wipes door glass as it moves up and down
  • (2) Triangular Window Seals: These are the seals that mount into the triangle at the front of the doors

Note: This kit will not fit vehicles with T-tops.

If your weatherstripping is causing leaks allowing damaging rain in, then this weatherstrip kit is for you. Why not replace your old, hardened, rotted seal with this new, ready to install weatherstrip set.

Item Condition: New

WARNING:  This product can expose you to chemicals including Mercaptobenzothiazole, which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:22)
    • Disconnect the negative battery cable with an 8mm wrench
  2. step : Removing the Door Panel (0:51)
    • Remove the bolts from the door pull
    • Pull off the door pull
    • Remove the screws from the door handle bezel
    • Pull out the window switch
    • Disconnect the window switch wiring harness
    • Pull out the door lock switch
    • Disconnect the door lock wiring harness
    • Pull off the door handle bezel
    • Pull out the door handle trim piece
    • Pry out the door panel with a putty knife
    • Pull off the door panel
    • Pull off the door ledge trim piece
    • For more detailed instructions, please see the 1986 Camaro door panel replacement video
  3. step : Removing the Weather Strip (2:07)
    • Remove the four Phillips screws from the top corners of the door
    • Peel back the weather strip at the top corners of the door
    • Pull off the weather strip
    • Pull out the weather strip pins with needle nose pliers
  4. step : Cleaning off the Glue (3:53)
    • Heat the glue with a heat gun
    • Scrape the glue off with a putty knife
    • Continue heating the glue
    • Clean the residue with a wire brush
    • Clean the remaining residue with mineral spirits
    • Repeat this step for all of the glue spots

Tools needed for replacement:

    General Tools

  • Heat Gun
  • Wire Brush
  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Mineral Spirits

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T27 Torx Driver

  • Wrenches - Metric

  • 8mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Camaro complete weather stripping kit.
Very good product with a great fit. Excellent service and delivery was on time.
May 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1982-1992Chevy Camaro Chevy Camaro Hardtop Complete Weatherstrip Seal Kit for Models without T-Tops
1982-1992Pontiac Firebird Pontiac Firebird Hardtop Complete Weatherstrip Seal Kit for Models without T-Tops
Part #: 1AWSK00309

Out of Stock

How-to Video:

(05:55 min)