Replaces

2002-2004 Pontiac Montana AWD Rear Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set

Part Details

  • Front / Rear Location: Rear

  • New

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Fits REAR Rotors
  • 4 Piece Brake Pad Set
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part number: 19149233
  • Fit 5 Lug Wheels
  • Built to strict quality control standards

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Wheel studs already included and installed
  • Replaces dealer part numbers: 7470017, 7470105, 7470143, 7470567, 7470568, 12429204
NOTE: It is very important when installing to tighten the Hub Nut to 118 foot lbs. Failure to use the correct torque specifications will result in premature failure of the hub.

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Disconnect the Lines (1:00)
    • Place a drip pan underneath the lines
    • Remove the bolt from the pressure line with an 11/16 and 5/8 flare wrench
  2. Disconnecting the Steering Flange (1:45)
    • Have a person hold the steering wheel
    • Remove the bolt from the steering flange with a 1/4 and 9/16 inch wrench
    • Turn the steering wheel 180 degrees
    • Remove the bolt from the steering flange with a 1/4 and 9/16 inch wrench
  3. Removing the Steering Box (2:49)
    • Remove the Pitman arm nut with an impact driver
    • Seat the Pitman arm puller to the bolt
    • Remove the bolt with an impact driver
    • Remove the three 5/8ths bolts from the gear box
    • Pull the steering box out
  4. Preparing the Steering Box (4:06)
    • Remove the 12-point bolt on the old steering shaft
    • Remove the bolt from the new steering shaft
    • Line up the flat spot on the flange with the flat spot on the steering box and connect them
    • Remove the two bolts on the steering flange
    • Turn the steering all the way to the right
    • Turn the steering to the left just under three full turns
    • Turn the steering to the right 1 and just under 1/2 turns
  5. Installing the Steering Box (7:04)
    • Line up the steering flange and Pitman arm
    • Insert one bolt into the steering box to keep it in place
    • Feel the larger bolt through the steering shaft
    • Tighten the other two bolts onto the steering box
    • Torque the bolts to 75 foot-pounds
    • Tighten the Pitman bolt
  6. Connecting the Steering Flange (9:16)
    • Have a person turn the steering wheel
    • Place the nut on, tighten it, back it off, place the lock washer on, and place the nut on
    • Rotate the wheel 180 degrees
    • Place the nut on, tighten it, back it off, place the lock washer on, and place the nut on
    • Torque the bolts to 30 foot-pounds
  7. Connecting the Lines (10:58)
    • Remove the plugs from the steering box
    • The larger line goes towards the inside of the car
    • Route the other line between the bolt and line
    • Check and tighten the lines
    • Insert and tighten the pressure line fitting in place
    • Insert the hose on the fitting
    • Clamp the band clamp with pliers
    • Torque the Pitman arm bolt to 140 foot-pounds
    • Fill the reservoir
    • Start the vehicle
    • Fill the reservoir again
    • Repeat the process twice until the steering wheel and move easily
    • Check the reservoir after the first few times the car is driven

Tools needed for replacement:

    Air Powered Tools

  • 1/2 Inch Air Impact Gun

  • General Tools

  • Assistant
  • Drain Pan
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - SAE

  • 1-3/8 Inch Socket
  • 7/16 Inch Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - SAE

  • 1/2 Inch Wrench
  • 11/16 Inch Wrench
  • 5/8 Inch Wrench
  • 9/16 Inch Wrench

How-to Video:

(13:55 min)

Tools List:

    Air Powered Tools

  • 1/2 Inch Air Impact Gun

  • General Tools

  • Assistant
  • Drain Pan
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - SAE

  • 1-3/8 Inch Socket
  • 7/16 Inch Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - SAE

  • 1/2 Inch Wrench
  • 11/16 Inch Wrench
  • 5/8 Inch Wrench
  • 9/16 Inch Wrench




Vehicle Fit

  • 2002-2006 Buick Rendezvous AWD Rear Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 2002-2004 Chevy Venture AWD Rear Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 2002-2004 Olds Silhouette AWD Rear Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 2001-2005 Pontiac Aztek AWD Rear Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 2002-2004 Pontiac Montana AWD Rear Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 2005 Pontiac Montana Base Model AWD Rear Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
$126.95
Part #: 1ABMS00032

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est