Replaces

2005-2008 Pontiac Grand Prix Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for V6 3.8L Models with ABS (excluding GXP Models)

Part Details

  • Front / Rear Location: Front

  • New

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Fits FRONT Rotors
  • 4 Piece Brake Pad Set
  • Includes shims
  • Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 18048698, 88964169
  • Fits 5 Lug Wheels
  • 11.69" (297mm) Diameter Vented Rotors

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Triangular Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: 7467357, 7467587, 12413093, 12413094, 12413125, 12413126, 12413194, 88964168
  • Wheel studs already installed
  • Include ABS sensors with correct plugs
  • Fit models with ABS (Anti-Lock Brakes) only

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel and tire (1:30 in the video)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. Remove Caliper (2:00 in the video)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. Remove brake disk (2:44 in the video)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. Remove Hub (2:56 in the video)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. Install new hub (8:30 in the video)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

How-to Video:

(09:37 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet




Vehicle Fit

  • 2005-2007 Buick Allure Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for Models with ABS
  • 2008 Buick Allure Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for V6 3.6L Models with ABS (excluding Super Models)
  • 2008 Buick Allure Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for V6 3.8L Models with ABS (excluding Super Models)
  • 2005-2007 Buick LaCrosse Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for Models with ABS
  • 2008 Buick LaCrosse Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for V6 3.6L Models with ABS (excluding Super Models)
  • 2008 Buick LaCrosse Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for V6 3.8L Models with ABS (excluding Super Models)
  • 2005 Chevy Uplander Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 2005-2008 Pontiac Grand Prix Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for V6 3.8L Models with ABS (excluding GXP Models)
  • 2005 Pontiac Montana SV6 Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 2005 Saturn Relay Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
$150.45
Part #: 1ABMS00019

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est