Kit Includes: (1) Front Ceramic Brake Pad Set with Contact Point Grease & Hardware (2) Front Brake Rotors
TRQ brake kits are designed to restore your brake system to like-new performance. TRQ brake pads are positive molded, thermal scorched, chamfered, and utilize a multi-layer shim for enhanced performance and service life. TRQ rotors have a non-directional finish that reduces the break-in period for new rotors as well as reducing vibrations throughout the rotor’s lifecycle. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Positive Molded - Less dust resulting in clean wheels
G3000 Casting Alloy - Reduced noise and improved wear resistance
Application Specific Design - Extended service life, no modifications
Front Brake Rotor Venting TypeVentedWheel Lug Count5 LugFront Brake Rotor Diameter11.65 in. (296mm)
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Front Brakes 2008-16 Toyota Camry
Created on:
Tools used
Large C-Clamp
Torque Wrench
14mm Socket
Pry Bar
Jack Stands
19mm Socket
21mm Socket
Rubber Mallet
Dead Blow Hammer
Paper Towels
Bungee Cord
Anti-Seize Grease
Wire Brush
Floor Jack
Cloth Rags
1. Removing the Wheel
Pry off the center cap with a flat blade screwdriver
Loosen the 21mm lug nuts with the vehicle on the ground
Raise the vehicle with a floor jack
Secure the vehicle on jack stands
Remove the lug nuts
Pull off the wheel
2. Removing the Brake Pads
Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
Remove 14mm bolts from the brake caliper
Pull the caliper aside and hang it by bungee cord
Remove the wires
Pry the brake pads off with a flat blade screwdriver
3. Removing the Brake Rotor
Remove 17mm bolts from the brake caliper bracket
Pull off the brake caliper bracket
Pull the rotor off
If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
4. Installing the New Brake Rotor
Clean the hub with a wire brush
Clean both sides of the rotor with brake parts cleaner
Slide the rotor on
Thread on one lug nut to hold the rotor in place
5. Installing the New Brake Pads
Put an old pad in the caliper
Use a large C-clamp and the old pad to push the pistons back
Clean the brake pad slides with a wire brush
Apply grease to the caliper slides
Put the caliper bracket back into place
Start the bolts by hand
Apply grease to the brake pad tabs
Install the new brake pads into the bracket
Put the caliper on
Tighten the bolts
Tighten the bracket bolts to 79 foot-pounds of torque
6. Reattaching the Wheel
Slide the wheel into place
Start the lug nuts by hand
Tighten the lug nuts preliminarily
Lower the vehicle to the ground
Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
Press on the hub cap
7. Testing the Brakes
Pump your brakes repeatedly until they feel firm
Test your brakes at 5 miles per hour and then 10 miles per hour
Road test the vehicle
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Use a large pry bar for a flat-bladed screwdriver to remove the wheel cover. I'm just going to slide it between the wheel and the plastic. Pop it off. These lug nuts are a 21 millimeter socket. I'm going to use that and a breaker bar to loosen them while the vehicle's on the ground. Then, raise and support the vehicle. We're using a two post lift, but you can use a jack and jack stands. The lug nuts are loose. I'm going to take the socket and finish removing them. I'm just going to hold on to the wheel. I'll take the last lug nut off. It's going to be loose. I don't want to drop it. Drop the lug nut. That's okay. I just don't want the wheel to fall.
Before I remove the caliper, I'm just going to pull on it and try to compress the piston. That way, it will slide right off. Take a 14 millimeter wrench to loosen the caliper slide bolts. There's one on the top, one on the bottom. They're pretty tight. If they don't want to budge, you can take a mallet to break them free. Same thing on the bottom one. I've got a bungee cord handy, so when I remove these caliper slide bolts, I could hang the caliper from the strut. Let's loop it around. The caliper should slide right off. See, one of our hardware pieces of hardware is actually broken on here. It should go right in there. The pads will slide right out like this.
Two 17 millimeter bolts that are holding the caliper on. There's one on the top and one on the bottom. To break them free, you can use the box wrench and the mallet. We've got these loose. I'm just going to remove them by hand.
The rotor is very loose. We don't want it to accidentally fall. I'm just going to take one of the lug nuts. Just put it on there so it doesn't fall on my feet. Remove the caliper bracket. So we're pretty lucky. This brake rotor's really loose. I'm going to take the lug nut off that I was using to hold it on, just slide it right off the studs and the hub. If it was rusted on, you could thread a couple of small bolts into here and evenly turn them down or push against the hub and push the rotor off.
These are old pads and rotors for our vehicle. I've got brand new ones from 1AAuto.com. So the pad design is very similar. The rotor design is the same. Five lug holes, two pusher holes. It's a ventilated rotor. This will fit great and help the car stop.
Before you put the rotor back on the hub, make sure it's nice and clean, not too rusty. This one's in good shape. If yours is really rusty around the hub here, take a wire brush and knock some of the rust down, clean it off. We're going to take our new rotor, and we'll install it backwards first. Take our brake parts cleaner, and we're going to clean off the oil that they ship with so they don't rust. Grab it, flip it over, install it the correct way. I'm just going to throw a lug not on here so it's not moving all around on me. Take a brake parts cleaner. Clean the surface. I'm just going to wipe down any excess.
You need to compress the cylinder back into the brake caliper. I'm taking the old brake pad, and I've got a C-clamp, and gently compress it. This way, our new pads that are thicker will fit. We need to clean our hardware so we can reuse it. We'll take some brake parts cleaner and just spray it in there. Get a wire brush. Just repeat for the other side. We're going to reinstall our bracket. Get those started by hand. The top one's usually easier to get done first, and you can move this one in and out to line it up. I'm just going to snug them down. Take some brake parts cleaner to just make sure the pad surface is nice and clean before you install them, and put just a tiny amount of brake caliper grease on the ears of the pad. Don't need to go crazy with this stuff.
The inside and outside pads are identical, so I'm going to start with the inside one. Pop it into the bottom, push it in. Repeat for the other pad. Clean it off. Put a little bit of grease on the ears. Replace the spring hardware, put it in place. It's going to balance the caliper. Swing it down. Get the back part caught first. Push that over. Caliper slide bolts and reinstall those. Get a 14 millimeter ratcheting wrench. Tighten them up, and torque the two caliper bracket mounting bolts to 79 foot-pounds. Don't forget to remove the bungee cord you were using. Make sure the brake rotor is clean. Sometimes, you get dirty fingerprints on it. I'm just going to double check that these are tight.
I'm going to reinstall our wheel. It's important to note these lug nuts have a taper. The taper meets the wheel, matches the inside of the wheel. Don't install them with the flat side like this. That is incorrect. Install them with the taper to the wheel. It helps locate the wheel on the lug nut stud. I'm just using the socket and ratchet to bring these down snug before I put the car on the ground, and torque the lug nuts to 76 foot pounds. I'm going in a cross pattern. We'll reinstall the hubcap. I'm going to line up the opening with the valve stem, with the valve stem on the wheel. Just push it in place.
Before we start the car, I'm just going to gently press the brake pedal down. Not all the way to the floor. You need about a quarter of the way, and just pump it. And this will bring the brake caliper piston out to meet the pads, because we compressed it. And you'll start to feel it get more solid as it pumps out.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
BKA11036
In Stock
Product Reviews
Loading reviews
4.71/ 5.059
59 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
51
3
3
0
2
Kit was okay, but missing the pad clips.
Rodney-F
March 14, 2018
The kit got here in a timely way, the parts fit fine and looked to be good quality, but the pad clips were missing. An big error if you are selling a kit.
OEM Quality at Aftermarket Price
Patrick
June 7, 2018
Had to replace my warped front rotors and swap in new pads. Very happy with my purchase as I haven't noticed any decrease in braking performance over the factory original setup. Would buy again!
Pads and rotors
Mark
December 17, 2018
Parts were exact replacements and fit like a dream. DELIVERY came as promised too. You're the best
Good quality parts
Devon
March 22, 2019
I love 1A AUTO good priced parts and love the how to videos. I have bought mamy parts from there website and will continue to for all my cars.
T
January 11, 2020
Very fast delivery!
Toyota Lexus Front Premium Posi Ceramic Brake Kit
Elliott
February 25, 2020
The rotors and pads were excellent. Much better then even the original equipment. I am very satisfied with this product.
It fit
Ryan
May 7, 2020
Worth it. Every thing fit and saved me $100. Shipping came in within a week
Got my parts
M
August 6, 2020
Good parts everything was good.
Happy to my order on time
V
August 19, 2020
Good price get part on time I am very happy
Fits perfectly
D
October 24, 2020
Both rotor and pads fit perfectly, will order again
Worked as advertised
Elijah
December 1, 2020
Easy install and worked great. I have been using it for a few weeks now
Work good
Anthony
March 10, 2021
No problems so far. They seem good. Would recommend.
Great all inclusive kit
Jeff
March 25, 2021
Applied new rotors and brake pads with all the supplied clips. Works great with good stopping force. Of course the best thing is it got rid of the pulsating warped rotor issue that I was having at 110k miles.
Easy install, very quiet
Paul
May 18, 2021
Perfect fit as well. Video of install was perfect
Quality parts and fast shipping.
Bob
June 13, 2021
I always get quality parts from 1Aauto! Never have any problems with anything I order.
My brother in law ordered parts online from a competitor and his brake pads were not bonded correctly. I told him about 1Aauto so Im sure he will be a new customer very soon.
Great place to do business
James
July 4, 2021
Got what I needed when I needed it
Fernando
July 15, 2021
Number #1 A Auto good and fast
Michael
July 25, 2021
Great products and fantastic service from 1A Auto. They are my new go to Auto Parts Supplier. Plus the videos are a huge bonus. Nobody beats a 1A Auto purchase.
Fernando
August 5, 2021
Excellent service respond very fasy
Perfect
Johnny
September 6, 2021
Perfect
Great
Ronnie
September 11, 2021
Great
Bad Brakes
Tamia
September 23, 2021
I installed the brakes and rotors on August 27th and the brakes have already gone bad. I had to buy new ones to replace them. About a week after they were installed, the brakes would make this screeching and grinding sound every time I stopped. My car would also slide if I pressed on the brakes too hard. Not sure what was wrong with the ones I bought.
Brake rotors and pads.
Rawlins
October 6, 2021
Great product as advertised!!!
Great place to do business with
Jerry
October 8, 2021
Fast shipping great customer service
Great product
Christopher
November 2, 2021
Great product easy to use. Love the help vids
Nilda
November 13, 2021
Fast shipping, happy with product
Stopping with confidence!!
Reyes
November 16, 2021
Been using your brakes on all my cars, again perfect fit and no complications. Your how to videos are amazing !!
Eric
December 20, 2021
Great deal as always!
As advertised! Great price! Fast shipping!
Jeff
January 9, 2022
As advertised! Great price! Fast shipping!
A
February 3, 2022
Good stuff
Very Satisfied
Paul
April 18, 2022
Brakes and rotors fit and work well. Would buy again.
Good
Imran
May 2, 2022
Good
Will purchase my parts from 1A from now on.
[{"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/43e274b2fd4a1d25a8a1f26d96db67e9_1651791649494_0.jpeg", "caption": "Perfect fit"}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/29bd8d6b2365f406fd7ed9c4f1804b2f_1651791684735_0.jpeg", "caption": "The factor pad cover fits perfect."}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/9f419bf5fc04de7521f2524a48e6fa9a_1651791727477_0.jpeg", "caption": "The factor pad cover fits perfect."}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/77d7f4fb59d36731b0351c924ab16b8b_1651791756071_0.jpeg", "caption": "I bought these bolts from Lowes. 13mm head. You will need these to pop your old rotor off."}]
Michael
May 5, 2022
Fast same day shipping. Perfect fit on all included parts. The last photo are the bolts that I bought from Lowes. I used these to screw into my old rotors to pop them off. I tried a mallet at first with no luck. These sized bolts will pop the old rotor s off in seconds. I'm so happy with 1A that I just ordered 2 front hubs for my 2015 Tahoe.
Good product
Jayson
May 14, 2022
Good product
Great fit and quality
francis
June 4, 2022
As always top quality and fit. I stopped buying from other places.
Everything worked great! Thank you. Installed brakes and rotors and saved myself $250. Product worked like a charm.
Good
Tomlee
November 4, 2022
Good
Brake Squeal!
Esteban
January 13, 2023
Installed this set on my 17 camry and after a few hundred miles brakes started squealing and squeaking. Now I need to buy CRC disc brake quiet and apply to backside of pads. A hassle to have to redo.
The Ozz
Oscar
April 20, 2023
Very good product shipping on time , no bad experience at all !! The items fit perfect ,
Impressive
Charles
May 30, 2023
Such wonderful customer service! I'll be ordering more parts for all of my vehicles! Thanks ??
Sarah
June 5, 2023
Products came as advertised. Good price. So far no complaints.
Review
JOSEPH
July 13, 2023
Good stuff
Front brakes rotors
ken
September 29, 2023
Works great no problems once so ever. Thank you!
Great Deal
[{"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/e63d345af1d11dfff9beb8abdd75d824_1699661005578_0.jpeg", "caption": "Wow, what a difference."}]
Anson
November 10, 2023
Perfect fit, quality brakes at a fraction of the price. Easy to install and shipped fast.
Love 1A
Ronald
December 30, 2023
I was impressed with how fast my order was processed and received. The parts fit perfectly and the price was very reasonable. Love ordering from 1A.
1ABFS01160-Toyota Lexus Front Ceramic Brake Pad & Rotor Kit TRQ BKA110...
Henry
January 16, 2024
The parts were perfectly fit in my car. 1A shipment was very quick and the price was reasonable. Thank you, 1A Auto.
Andy
February 6, 2024
The parts come right and fast thank you.
Akbar
March 4, 2024
Brake pads and rotors worked perfectly on my 2011 Camry 2011 LE model.
James
March 21, 2024
Everything was good
Good Quality and Excellent Return/Replacement Process!
Jim
March 26, 2024
The rotors are great! I have smooth braking no. When I opened the pads most of the clips were bent and 2 pads were damaged. I used the website to get a replacement and it was very easy and I got my replacements quickly.
Toyota Camry front brake pads
David
May 22, 2024
Excellent response and delivery, great fit and they are performing well.
5= star's
Front Brakes and Rotors
EricTankard
July 8, 2024
Nice and quiet, and really responsive. Will buy again when needed!!! Very Satisfied!
Best company 1A Auto
Richard
August 14, 2024
100%better than what I had on there before
Ali
August 18, 2024
yes the good
Customer Q&A
Does kit include the clips for brake pads?August 12, 2018
Sonia C
10
the kit contain everything that was necessary for my vehicle.
August 12, 2018
Danny L
10
This kit does not include new brake hardware, so it does not have the brake pad caliper clips.
August 13, 2018
T I
10
The photo shows brake hardware and the description lists brake hardware as included. Clarification on previous answer please. Hardware yes or no?
October 15, 2021
Thomas S
Would these brakes and rotors fit a 2006 Avalon ?August 23, 2024
John D
10
This part will not fit your vehicle, but we may have a part that is listed to fit.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
August 24, 2024
Kemal S
What are the best kind of brake pad ? Metallic, Simi metallic And for what reason do you say so ?September 15, 2024
Andrew B
10
What every is better for your budget
September 30, 2024
David C
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.