Replaces

2005-2009 Buick LaCrosse Front Sway Bar Kit for Models with RPO Code FE1 Suspension

This part replaces:

  • OE # 10243923, 10274736
  • HOLLANDER 524-00585, 524-00301,524-00561
  • DORMAN 927-110

  • New

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • FRONT or REAR (as listed by application) Sway Bar with Install Kit
  • Includes brackets, bushing, end links, & hardware
  • Replaces dealer part numbers: 10243923, 10274736
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:38 in the video)
    • Remove the lug nut caps with a 19mm socket
    • Pull off the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Sway Bar Links (1:05 in the video)
    • Hold the upper sway bar link stud with a 14mm inch wrench
    • Remove the upper nut from the sway bar link with an 18mm socket and ratchet
    • Hold the lower sway bar link stud with a 14mm inch wrench
    • Remove the lower nut from the sway bar link with an 18mm socket and ratchet
    • Pull off the sway bar link
    • Remove the other sway bar link following these same steps
  3. Removing the Sway Bar (1:35 in the video)
    • Apply penetrating oil to the sway bar mount bolts
    • Remove the 15mm bolt from each sway bar mount
    • Lift the sway bar mount up and off
    • Slide the sway bar back and out
  4. Installing the New Sway Bar (2:26 in the video)
    • Put the new sway bar into place
    • Clip the sway bar mounts onto the sway bar
    • Put the sway bar links into place
    • Thread the nuts onto the sway bar links by hand
    • Push the sway bar into its mounts
    • Start the 15mm bolts into each sway bar mount by hand
    • Hold the upper sway bar link stud with a 14mm inch wrench
    • Fasten the upper nut onto the sway bar link with an 18mm socket and ratchet
    • Hold the lower sway bar link stud with a 14mm inch wrench
    • Fasten the lower nut onto the sway bar link with an 18mm socket and ratchet
    • Lower the vehicle onto jack stands so the suspension sits at ride height
    • Tighten the 15mm bolt into each sway bar mount
  5. Reattaching the Wheel (4:23 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the hub cap
    • Install the lug nut covers with a 19mm socket

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Penetrating Oil

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

  • Wrenches - Metric

  • 14mm Wrench

How-to Video:

(05:29 min)

Tools List:

    Materials, Fluids, and Supplies

  • Penetrating Oil

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

  • Wrenches - Metric

  • 14mm Wrench



This part replaces:

  • OE # 10243923, 10274736
  • HOLLANDER 524-00585, 524-00301,524-00561
  • DORMAN 927-110

Vehicle Fit

  • 2005-2007 Buick Allure Rear Sway Bar Kit for Models with RPO Code FE1 Suspension
  • 2005-2009 Buick Allure Front Sway Bar Kit for Models with RPO Code FE1 Suspension
  • 1997-2005 Buick Century Rear Sway Bar Kit
  • 2005-2007 Buick LaCrosse Rear Sway Bar Kit for Models with RPO Code FE1 Suspension
  • 2005-2009 Buick LaCrosse Front Sway Bar Kit for Models with RPO Code FE1 Suspension
  • 1997-2004 Buick Regal Rear Sway Bar Kit
  • 2000-2003 Chevy Impala Rear Sway Bar Kit for Models with RPO Code FE2 Suspension
  • 2000-2005 Chevy Impala Rear Sway Bar Kit for Models with RPO Code FE1 Suspension
  • 2000-2003 Chevy Impala Rear Sway Bar Kit for Models with RPO Code FE3 Suspension
  • 2000-2003 Chevy Monte Carlo Rear Sway Bar Kit
  • 1998-2002 Olds Intrigue Rear Sway Bar Kit
  • 1997-2003 Pontiac Grand Prix Rear Sway Bar Kit
  • 2004-2007 Pontiac Grand Prix Rear Sway Bar Kit for Models with RPO Code FE2 Suspension
  • 2007 Pontiac Grand Prix Rear Sway Bar Kit for Models with RPO Code FE1 Suspension
$85.45
Save 40%
List: $141.36 Save: $55.91
Part #: 1ASSL00360

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est