Replaces

1999-2000 Isuzu Hombre 4 Wheel Drive 14 Piece Set Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Tie Rod Adjusting Sleeves
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 14 Piece Set
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • OE # 8260485610
  • Reference Number K5335
  • Reference Number K5320
  • Reference Number K6251T
  • Reference Number ES2004S
  • Reference Number ES3584
  • Reference Number ES3462
  • Reference Number K6255
  • Reference Number K6600
  • OE # 26048561, 7839709, 8260485610
  • OE # 26054968
  • OE # 12471301
  • OE # 12471300

  • New

Specifications:

  • Brand New Steering and Suspension Kit
  • Comes as a 14 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Clean up the top of the upper control arm (1:00)
  2. Install the ball joint (1:07)
    • Line up the boot on the ball joint and put the ball joint in place and put the nut on it.
    • Bolt the ball joint in with the four nuts and bolts.
    • Torque them to 25 ft lbs
  3. Install the tie rod. (2:18)
    • Put the tie rod in place
    • Bolt it in at 55 ft lbs.
    • Put in the cotter pin, hammer it through and bend it with a pair of pliers.
    • Fill the tie rod end with grease.
  4. Install the hub (3:35)
    • Put the O ring into the hub.
    • Mount the hub and thread the ABS harness into place.
    • Bolt the hub into place and make sure the shield is in the correct position.
    • Use a star like pattern when bolting in the hub and torque the bolts to 65 ft lbs.
    • Clip and bolt the ABS harness in and connect it.
  5. Install the brakes (6:05)
    • Mount the rotor and caliper
    • Bolt the caliper bolts in and torque to 50-60 ft lbs.
    • Use a rubber mallet to help get the caliper on.
  6. Install the hub nut and wheel. (7:00)
    • Before putting the wheel on, put the hub nut on and tighten but do not torque.
    • Put the wheel back on and lower the car.
    • Torque the hub nut to 90 ft lbs.
    • Using a star pattern, torque the wheel lug nuts to 75 ft lbs.
    • Put the cap and lug nut covers on.

Tools needed for replacement:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 20mm Socket
  • 21mm Socket
  • 22mm Socket
  • 24mm Socket
  • 35mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 13mm Wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Are the uppet and lower ball joints greasable?
Mini24 on Sep 15, 2015
BEST ANSWER: yes they both have a part with threads and a grease fitting. I did not install the ball joints but the steering parts all worked great. I recommend the kit
Frequently Asked Questions:

Do some of these parts need to be greased?

  • <p>These greasable parts all come pre-greased from the factory.</p>
  • Do some of these parts need to be greased?

  • <p>These greasable parts all come pre-greased from the factory.</p>

  • How-to Video:

    (09:04 min)

    Tools List:

      General Tools

    • Chisel
    • Floor Jack
    • Hammer
    • Jack Stands
    • Rubber Mallet

    • Materials, Fluids, and Supplies

    • Rust Penetrant

    • Ratchets & Related

    • Ratchet
    • Socket Extensions
    • Torque Wrench

    • Screwdrivers & Related

    • Flat Blade Screwdriver
    • Pry Bar

    • Sockets - Metric

    • 10mm Socket
    • 11mm Socket
    • 12mm Socket
    • 13mm Socket
    • 14mm Socket
    • 15mm Socket
    • 16mm Socket
    • 17mm Socket
    • 18mm Socket
    • 19mm Socket
    • 20mm Socket
    • 21mm Socket
    • 22mm Socket
    • 24mm Socket
    • 35mm Socket

    • Specialty Tools

    • Grease Gun

    • Wrenches - Metric

    • 13mm Wrench
    • 18mm Wrench



    This part replaces:

    • OE # 8260485610
    • Reference Number K5335
    • Reference Number K5320
    • Reference Number K6251T
    • Reference Number ES2004S
    • Reference Number ES3584
    • Reference Number ES3462
    • Reference Number K6255
    • Reference Number K6600
    • OE # 26048561, 7839709, 8260485610
    • OE # 26054968
    • OE # 12471301
    • OE # 12471300

    Vehicle Fit

    • 1998 Chevy Blazer S10 4 Wheel Drive 14 Piece Set Suspension Kit for Models with Offset Tie Rod with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1999-2005 Chevy Blazer S10 4 Wheel Drive 14 Piece Set Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1998 Chevy S10 Pickup 4 Wheel Drive 14 Piece Set Suspension Kit for Models with Offset Tie Rod with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1999-2004 Chevy S10 Pickup 4 Wheel Drive 14 Piece Set Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1998 GMC Jimmy S-15 4 Wheel Drive 14 Piece Set Suspension Kit for Models with Offset Tie Rod with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1999-2001 GMC Jimmy S-15 4 Wheel Drive 14 Piece Set Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1999-2004 GMC S-15 Sonoma 4 Wheel Drive 14 Piece Set Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1998 Isuzu Hombre 4 Wheel Drive 14 Piece Set Suspension Kit for Models with Offset Tie Rod with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1999-2000 Isuzu Hombre 4 Wheel Drive 14 Piece Set Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    • 1999-2001 Olds Bravada 4 Wheel Drive 14 Piece Set Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
    $ 113.95
    Save 84%
    List: $722.68 Save: $608.73
    Part #: 1ASFK00995

    Out of Stock

    Free GROUND SHIPPING

    Check Shipping Rates

    We're here to help

    1A Auto Parts

    Customer Feedback

    Customer Feedback
    "Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
    - Dwuan M.
    Read More
    Free Shipping!
    OR
    CALL
    TOLL
    FREE

    888-844-3393

    hablamos Español:866-401-3393
    SHIPS SAME DAY M-F
    For Orders Placed By 5pm Est