Replaces

2002-2004 Chrysler 300M Ignition Coil for V6 3.5L (8th Vin Digit K) V6 3.5L (8th Vin Digit K)

This part replaces:

  • HOLLANDER 610-05824, 610-02824
  • STANDARD MOTOR PRODUCTS UF-269
  • OE # 04609088AD

  • New

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

This coil over plug Ignition Coil features the following specifications:

  • New not remanufactured
  • Replaces dealer part numbers: 4609088AC, 4609088AD, 4609088AF, 4609088AG, 04609088AD, 04609088AF, 04609088AC
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested
  • Fits the following Chrysler, Dodge, & Plymouth 6 cylinder engine applications as listed:
    • V6 3.2L
    • V6 3.5L

This coil is a distributorless application. Sold as Each. 6 are required per vehicle, replace individually as needed.

These are electrical parts and are all tested before they leave our manufacturer. This electrical item is not returnable; it is only eligible for exchange.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Accessing the Ignition Coils (0:57 in the video)
    • Undo the cable clip
    • Move the cables aside
    • Disconnect the PCV hose
    • Move the PCV hose aside
  2. Removing the Ignition Coil (1:35 in the video)
    • Disconnect the ignition coil wiring harness
    • Remove the two 8mm bolts from the ignition coil
    • Pull the ignition coil up and out
  3. Removing the Spark Plug (2:26 in the video)
    • Loosen the spark plug with a 5/8 inch spark plug socket
    • Remove the spark plug
  4. Preparing the New Spark Plug (3:44 in the video)
    • Find the spark plug gap for your vehicle in the under hood decal or your owner's manual
    • Check the gap with a spark plug gapping tool
    • The correct setting of the tool should slide into and out of the gap with some resistance
    • Adjust the gap as necessary
  5. Installing the New Spark Plug (4:34 in the video)
    • Put the new spark plug into place
    • Tighten the spark plug with a 5/8 inch spark plug socket
    • Tighten the spark plug to between 20 - 25 foot-pounds of torque
  6. Installing the New Ignition Coil (5:33 in the video)
    • Push the new ignition coil into place with the wiring connector facing the rear of the vehicle
    • Insert the two 8mm bolts into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 2 through 6 for the remaining coils
  7. Reconnecting the Cables (7:01 in the video)
    • Reconnect the PCV hose
    • Put the cables back into their clip
    • Fasten the cable clip

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket

How-to Video:

(07:41 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket



This part replaces:

  • HOLLANDER 610-05824, 610-02824
  • STANDARD MOTOR PRODUCTS UF-269
  • OE # 04609088AD

Vehicle Fit

  • 2005 Chrysler 300 Ignition Coil for V6 3.5L (8th Vin Digit G) V6 3.5L (8th Vin Digit G)
  • 1999-2004 Chrysler 300M Ignition Coil for V6 3.5L (8th Vin Digit G) V6 3.5L (8th Vin Digit G)
  • 2002-2004 Chrysler 300M Ignition Coil for V6 3.5L (8th Vin Digit K) V6 3.5L (8th Vin Digit K)
  • 1998-2001 Chrysler Concorde Ignition Coil for V6 3.2L (8th Vin Digit J) V6 3.2L (8th Vin Digit J)
  • 2002-2004 Chrysler Concorde Ignition Coil for V6 3.5L (8th Vin Digit M) V6 3.5L (8th Vin Digit M)
  • 2002-2004 Chrysler Concorde Ignition Coil for V6 3.5L (8th Vin Digit G) V6 3.5L (8th Vin Digit G)
  • 1999-2001 Chrysler LHS Ignition Coil for V6 3.5L (8th Vin Digit G) V6 3.5L (8th Vin Digit G)
  • 2004-2006 Chrysler Pacifica Ignition Coil for V6 3.5L (8th Vin Digit 4) V6 3.5L (8th Vin Digit 4)
  • 1999-2002 Chrysler Prowler Ignition Coil for V6 3.5L (8th Vin Digit G) V6 3.5L (8th Vin Digit G)
  • 1998-2001 Dodge Intrepid Ignition Coil for V6 3.2L (8th Vin Digit J) V6 3.2L (8th Vin Digit J)
  • 2000-2004 Dodge Intrepid Ignition Coil for V6 3.5L (8th Vin Digit V) V6 3.5L (8th Vin Digit V)
  • 2001-2004 Dodge Intrepid Ignition Coil for V6 3.5L (8th Vin Digit G) V6 3.5L (8th Vin Digit G)
  • 2002-2004 Dodge Intrepid Ignition Coil for V6 3.5L (8th Vin Digit M) V6 3.5L (8th Vin Digit M)
  • 2005 Dodge Magnum Ignition Coil for Models with V6 3.5L (8th Vin Digit G or V)
  • 1999-2002 Plymouth Prowler Ignition Coil for V6 3.5L (8th Vin Digit G) V6 3.5L (8th Vin Digit G)
$23.95
Save 47%
List: $45.35 Save: $21.40
Part #: 1AECI00114

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est