Replaces

2002-2004 Olds Bravada Gen-II Air Spring Rear Pair (Arnott)

Part Details

  • Front / Rear Location: Rear
  • Brands: Arnott

This part replaces:

  • Arnott A-2610

  • New

ARNOTT INDUSTRIES GEN-II AIR SPRING PAIR: A-2610

As the industry leader in manufacturing quality air suspension parts and accessories for over 20 years, Arnott is the best choice for your vehicle.

Arnott has just completed the development of the second generation rear air springs for the Chevrolet Trailblazer. Arnott has specially designed them to eliminate many of the common problems associated with the older OE bellow design. These air springs feature a state-of-the-art tapered bladder that provides an unparallel ride quality. An upgrade from the original, this new air spring's design features CNC-machined crimp rings, which are used to hold together the heavy duty air springs' assembly. The crimp ring assures durability, as opposed to the loose-fitting snap together original design, making the second generation air spring more dependable. In the spirit of evolution, experience for yourself Arnott's stronger, more dependable air spring, the next generation of suspension technology.

Specifications:
  • Brand New Arnott Gen-II Air Springs
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Upgraded design
  • Heavy duty air spring bladders
  • Direct replacements
  • Built to strict quality control standards
  • Correct for both 5 passenger (113" wheel base) & 7 passenger (129" wheel base)
ARNOTT is your source for air shocks and air suspension components for Lincoln, Ford, Cadillac, Lexus and Range Rover. Since 1989, Arnott has been designing and manufacturing quality air struts, compressors (pumps) and air bags (springs). Arnott continues to lead in research and development of new products while maintaining affordable prices.


Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Accessing the Compressor (0:43 in the video)
    • Open the fuse box
    • Disconnect the ECAS with a pair of pliers
    • Jack up the vehicle underneath the axle
    • Place jack stands underneath the rear frame rails
    • Take four sections of the jack pipe
    • Insert it into the rear hole, connect a tire iron, and turn it counterclockwise to lower the spare tire
  2. Disconnecting the Compressor (1:47 in the video)
    • Disconnect the wiring harnesses
    • Remove the harness clip from the frame
    • Push the hose in, push down on the connector, and pull the hose free
    • Remove the two 13mm bolts from the compressor
    • Pull the compressor down
    • Loosen the two hoses with a 10mm wrench
    • Release the air from the springs
    • Push the hoses in and tighten the fittings to 1 or 2 ft/lbs
    • Replace the two 13mm bolts and tighten them to the frame
  3. Removing the Air Springs (4:23 in the video)
    • Pull the bottom of the spring out
    • Push down and unlock the tab on the back of the spring and twist
    • Push the driver's side spring with a screwdriver and drive it with a hammer to release it
    • Pull the spring down
    • Disconnect the hose by pushing down on the fitting on the hose with pliers
  4. Installing the Air Springs (5:24 in the video)
    • Remove the plastic shipping piece on the tip
    • Open the top of the air spring using a 10mm wrench
    • Push the hose down into place
    • Tighten the 10mm nut
    • Twist the air spring into place
  5. Installing the Air Compressor (7:02 in the video)
    • Reconnect the two hoses and wiring harness
    • Clip the harness to the frame
    • Make sure both springs seat correctly to the axle as you lower the vehicle
    • Reinstall the ECAS control
    • Close the fuse box
    • Start up the vehicle to inflate the bags
    • Raise up the spare tire

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 10mm Wrench

How-to Video:

(08:17 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 10mm Wrench



This part replaces:

  • Arnott A-2610

Vehicle Fit

  • 2004-2007 Buick Rainier Gen-II Air Spring Rear Pair (Arnott)
  • 2002-2009 Chevy Trailblazer Gen-II Air Spring Rear Pair (Arnott)
  • 2002-2006 Chevy Trailblazer EXT Gen-II Air Spring Rear Pair (Arnott)
  • 2002-2009 GMC Envoy Gen-II Air Spring Rear Pair (Arnott)
  • 2002-2006 GMC Envoy XL Gen-II Air Spring Rear Pair (Arnott)
  • 2004-2005 GMC Envoy XUV Gen-II Air Spring Rear Pair (Arnott)
  • 2003-2008 Isuzu Ascender Gen-II Air Spring Rear Pair (Arnott)
  • 2002-2004 Olds Bravada Gen-II Air Spring Rear Pair (Arnott)
  • 2005-2009 Saab 9-7X Gen-II Air Spring Rear Pair (Arnott)
$199.95
Save 64%
List: $551.20 Save: $351.25
Part #: ARASP00025

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
Arnott
Brand #: A-2610

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est