Replaces

2002-2004 Ford Mustang Taillight Driver Side

Part Details

  • Side Location: Driver Side

This part replaces:

  • PARTSLINK FO2818109
  • OE # 3R3Z 13405 AA
  • HOLLANDER 166-1771L

  • New

This replacement Tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side)
  • Replaces dealer part number: 3R3Z-13405-AA, 3R3Z13405AA
  • All red lens with backup lamp in lower inside section
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. Removing the Taillight (0:29 in the video)
    • Twist the plug off.
    • Pull the upper plug off.
    • Pull the insulation panel back.
    • Disconnect the taillight harness.
    • Remove the 11mm nuts securing the light.
    • Push the harness plug through and pull the light out and off.
  2. Removing Sockets / Changing a Bulb (2:18 in the video)
    • Twist the sockets counter clockwise to remove.
    • To replace a bulb just pull it straight out. Push the new bulb into place.
    • Twist out all of the sockets and remove the retainer clips.
  3. Replacing the Taillight (3:00 in the video)
    • Remove the shipping covers from your new taillight assembly.
    • Push the retainers into place.
    • Twist in all of the sockets clockwise to lock.
    • Push your harness through.
    • Line up the taillight and press it into place.
    • Replace the 11mm nuts.
    • Pull the plug through and reconnect the harness.
    • Replace the insulation.
    • Replace the two plugs.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 11mm Wrench

How-to Video:

(05:38 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 11mm Wrench



This part replaces:

  • PARTSLINK FO2818109
  • OE # 3R3Z 13405 AA
  • HOLLANDER 166-1771L

Vehicle Fit

  • 1999-2001 Ford Mustang Taillight Driver Side (excluding Cobra Model)
  • 2002-2004 Ford Mustang Taillight Driver Side
$37.95
Save 43%
List: $66.97 Save: $29.02
Part #: 1ALTL00114

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est