Replaces

Ford F150 Truck Turn Signal and Wiper Switch Lever - 1AZTS00207

This part replaces:

  • HOLLANDER 629-00733
  • STANDARD MOTOR PRODUCTS CBS-1251
  • OE # 4L3Z13K359AAA
  • Wells SW7382

  • New

This headlight, turn signal lever, & wiper switch is just what you need to get your vehicle in good working order again!

Specifications:

  • Controls the following functions:
    • Turn Signal
    • High Beam
    • Windshield Wiper
  • Direct fit replacement
  • Built to strict quality control standards

This combination turn signal lever & headlight switch makes great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Disconnecting the Battery (0:46 in the video)
    • Disconnect the battery cables with an 8mm socket and ratchet
  2. Removing the Air Bag Fuse (1:04 in the video)
    • Pull off the fuse box panel
    • Pry off the fuse box cover with a flat blade screwdriver
    • Pry the fuse puller out of the fuse box cover
    • Pull out the red fuse marked 10 with the fuse puller
  3. Removing the Air Bag Assembly (1:41 in the video)
    • Pry the screw covers off the steering wheel with a flat blade screwdriver
    • Remove the two 8mm bolts from the steering wheel
    • Pull the air bag assembly forward
    • Disconnect the air bag assembly wiring harnesses with a pick
  4. Removing the Steering Wheel (2:48 in the video)
    • Remove the 7/32" bolt from the lower steering shaft panel
    • Disconnect the wiring harness at the top of the steering wheel
    • Turn the steering wheel until it clicks
    • Remove the T50 Torx bolt from the steering wheel
    • Pull the steering wheel off the stud with a two-jaw puller
  5. Removing the Turn Signal Switch (3:33 in the video)
    • Pull down the steering wheel angle lever
    • Pull off the lower steering shaft panel
    • Remove the two 7/32" bolts from the upper steering shaft panel
    • Remove the 7/32" bolt from the turn signal switch
    • Lift the signal switch up and off
    • Disconnect the signal switch wiring harnesses
  6. Installing the Signal Switch (5:03 in the video)
    • Pull the spring out of the old switch with a pick
    • Put the spring into the new switch
    • Slide the switch into place
    • Connect the signal switch wiring harnesses
    • Insert the 7/32" bolt into the switch
    • Lift the steering wheel
    • Put on the upper steering shaft panel
    • Insert the two 7/32" bolts into the upper steering shaft panel
    • Slide on the lower steering shaft panel
    • Clip the steering shaft panel together
    • Insert the 7/32" bolt into the lower steering shaft panel
  7. Installing the Steering Wheel (6:57 in the video)
    • Line up the steering wheel with the yellow dot on the steering shaft
    • Connect the wiring harness at the top of the steering wheel
    • Insert the T50 bolt into the steering wheel
  8. Installing the Air Bag Assembly (7:18 in the video)
    • Straighten the steering wheel
    • Connect the air bag assembly wiring harnesses
    • Push the air bag assembly into place
    • Insert the two 8mm bolts into the steering wheel
    • Push the two screw covers onto the steering wheel
  9. Installing the Air Bag Fuse (8:03 in the video)
    • Push the air bag fuse into place
    • Push the fuse puller into the fuse box cover
    • Push on the fuse box cover
    • Clip on the fuse cover panel
  10. Connecting the Battery (8:27 in the video)
    • Connect the battery cables with an 8mm socket and ratchet

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 7/32 Inch Socket

  • Specialty Tools

  • 2 Jaw Gear Puller
  • Pick

  • Torx Drivers & Sockets

  • T50 Torx Socket

  • Wrenches - Metric

  • 8mm Wrench

How-to Video:

(09:08 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 7/32 Inch Socket

  • Specialty Tools

  • 2 Jaw Gear Puller
  • Pick

  • Torx Drivers & Sockets

  • T50 Torx Socket

  • Wrenches - Metric

  • 8mm Wrench



This part replaces:

  • HOLLANDER 629-00733
  • STANDARD MOTOR PRODUCTS CBS-1251
  • OE # 4L3Z13K359AAA
  • Wells SW7382

Vehicle Fit

  • 2004 Ford F150 Truck New Body Style Turn Signal and Wiper Switch Lever
  • 2005 Ford F150 Truck (Built Before 11/29/04 Production Date) Turn Signal and Wiper Switch Lever
$65.45
Save 47%
List: $122.64 Save: $57.19
Part #: 1AZTS00207

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

Email Us

hablamos Español:Email Us
SHIPS SAME DAY
For Orders Placed By 5pm Est