1998-2000 Dodge Durango Fog / Driving Light Pair

Part Details

  • Quantity: Pair

  • New

This pair of fog driving lights is just what you need to get your vehicle in good looking form again!

Fog Light Specifications

  • Comes as a pair
  • Replaces dealer part numbers: 55076793, 55077267AA, 55076792, 55077266AA
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This pair of fog driving lamps is a great replacement and has good cost savings over a fog light from the dealer.


Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. To change the bulbs (1:00)
    • Under the bumper you can access the assembly.
    • Unplug the wiring connection.
    • Untwist the bulb.
  2. Remove the headlight assembly. (1:45)
    • Remove the T10 Torx screw between the parking and headlight.
    • Pull the parking light assembly out and disconnect the bulbs.
    • Remove the three 10 mm bolts now exposed.
    • Unclip the headlight assembly and transfer the clip back onto the vehicle.
  3. Remove the fog light assembly (3:29)
    • Now you can access the two 10 mm bolts at the top of the fog light assembly.
    • Remove the fog light.
  4. install the new fog light assembly (4:07)
    • Put the assembly into place.
    • Mount with the two 10 mm bolts.
    • Plug in the bulbs and wiring harness.
  5. Install the headlight assembly (4:49)
    • Plug in the wiring harness and bulbs.
    • Clip the headlight in and bolt the headlight in with your socket and ratchet.
    • Plug in your three bulbs and mount your parking light.
    • Secure with the T10 Torx screws.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
I have a 2000 dodge Dakota sport, and the stock bumper do not have the fog light holes cut out. What tool would I need to use to make a perfect circle?
Jay D on Jan 8, 2016
BEST ANSWER: A dremel with a plastic or sheetrock bit will do the job. But make sure you tape off the area to give yourself a guide.
What is the thread size pitch and length of fog lamp mounting screws or bolts?Thanks
Corey H on May 12, 2016
BEST ANSWER: Sorry these specs are not available. They are the same as OEM.

How-to Video:

(05:52 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver

Vehicle Fit

  • 1997-2000 Dodge Dakota Fog / Driving Light Pair
  • 1998-2000 Dodge Durango Fog / Driving Light Pair
$ 64.95
Save 38%
List: $104.00 Save: $39.05
Part #: 1ALFP00095

Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est